GB/T 23852-2009Analytical method of thiocyanate for industrial use (English PDF)
工业硫氰酸盐的分析方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23852-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 18, 2009
Implementation date
February 1, 2010
Scope
GB/T 23852-2009 is the English-translated version of 工业硫氰酸盐的分析方法.
GB/T 23852-2009 is the Chinese standard "Analytical method of thiocyanate for industrial use".
Its scope clause reads: This standard specifies the industrial ammonium thiocyanate, sodium thiocyanate industry and industrial potassium thiocyanate thiocyanate content, iron content, containing water insoluble The amount of volatile content at 105 °C, the halide content, sulfide content, heavy metal content, pH, sulfate content, burn residue content and (Industrial sodium thiocyanate and potassium thiocyanate industry) Analysis salt content.
This standard applies to industrial thiocyanate products, including industrial ammonium thiocyanate, potassium thiocyanate industry, industrial sodium thiocyanate.
Its clauses include safety tips; general provisions; determination of thiocyanate content.
Found what you need?
Document preview — GB/T 23852-2009
National Standard of the People's Republic of China
- ICS
- 71.060.01
- Classification
- G 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Safety Tips
- 4 General Provisions
- 5 Determination of thiocyanate content
1 Scope
This standard specifies the industrial ammonium thiocyanate, sodium thiocyanate industry and industrial potassium thiocyanate thiocyanate content, iron content, containing water insoluble
The amount of volatile content at 105 °C, the halide content, sulfide content, heavy metal content, pH, sulfate content, burn residue content and (Industrial sodium thiocyanate and potassium thiocyanate industry) Analysis salt content.
This standard applies to industrial thiocyanate products, including industrial ammonium thiocyanate, potassium thiocyanate industry, industrial sodium thiocyanate.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
General Method GB/T 3049-2006 industrial chemicals determination of iron content 1,10 Philippines spectrophotometry method (ISO 6685. 1982, IDT)
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
Preparation of standard titration solution of HG/T 3696.1 inorganic chemical products, chemical analysis
Preparation of HG/T 3696.2 inorganic chemical products, chemical analysis of impurity standard solution
Preparations of HG/T 3696.3 inorganic chemical products, chemical analysis
3 Safety Tips
Reagents used in this test method has toxic or corrosive, be careful when operating! Should immediately splashed on the skin, such as
Rinse water, severe cases should be treated immediately.
4 General Provisions
This standard reagents and water, did not indicate when the other requirements, refer to analytically pure reagents and GB/T 6682-2008 stipulated three
Grade water. Test with the standard titration solution, impurity standard solution, preparations and products, did not indicate when the other requirements, according
HG/T 3696.1, HG/T 3696.2, the provisions of HG/T 3696.3 of preparation.
5 Determination of thiocyanate content
5.1 Method summary
In acidic solution was added an excess of silver nitrate, silver thiocyanate is generated, then ammonium ferric sulfate as indicator, titrate with ammonium thiocyanate standard solution
Liquid back titration.
5.2 Reagents
5.2.1
95% ethanol;
5.2.2 nitric acid solution
1 + 9;
5.2.3 solution of ammonium ferric sulfate
50g/L;
5.2.4 standard silver nitrate titration solution
Ba (AgNO3) ~0.1mol/L;
5.2.5 Ammonium thiocyanate standard titration solution
Ba (NH4SCN) ~0.1mol/L.
5.3 Analysis Steps
It weighs about 105 °C ± 3g was constant quality crystal sample to 2 °C bake about 6g or liquid sample, accurate to 0.0002g, placed
GB/T 23940-2021 | GB/T 23769-2009 | GB/T 23774-2009 | GB/T 23844-2019 | GB/T 23843-2009 | GB/T 23842-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 23852-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 23852-2009
$165.00