GB/T 23845-2009Inorganic chemicals for industrial use - General method for the determination of bromide (English PDF)
无机化工产品中溴化物测定通用方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23845-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 18, 2009
Implementation date
February 1, 2010
Scope
GB/T 23845-2009 is the English-translated version of 无机化工产品中溴化物测定通用方法.
GB/T 23845-2009 is the Chinese standard "Inorganic chemicals for industrial use - General method for the determination of bromide". Its scope clause reads: This standard specifies the determination of inorganic chemicals bromide general method of Method summary, analysis procedures and results of calculations.
This standard applies to the determination of trace amounts of inorganic chemical products bromide. Detection range of 1µg/mL ~ 4µg/mL (in Br -meter). Its clauses include method summary; safety tips; general provisions; reagents.
Found what you need?
Document preview — GB/T 23845-2009
National Standard of the People's Republic of China
- ICS
- 71.060.01
- Classification
- G 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 Safety Tips
- 5 General Provisions
- 6 Reagents
1 Scope
This standard specifies the determination of inorganic chemicals bromide general method of Method summary, analysis procedures and results of calculations.
This standard applies to the determination of trace amounts of inorganic chemical products bromide. Detection range of 1µg/mL ~ 4µg/mL (in Br
-meter).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
Preparation of HG/T 3696.2 inorganic chemical products, chemical analysis of impurity standard solution
Preparations of HG/T 3696.3 inorganic chemical products, chemical analysis
3 Method summary
In acidic medium, the chloramine-T oxidation of bromide to free bromine, bromine then reacts with phenol red tetrabromo phenol red, the color with the bromide
Content increases yellowish green to purple. Within a certain range of concentration, absorbance proportional to the amount of bromide.
4 Safety Tips
Reagents used in this test method are toxic or corrosive, be careful when operating! Such as water splashed on the skin should immediately
Flushing, severe cases should be treated immediately.
5 General Provisions
This standard reagents and water, did not indicate when the other requirements, refer to analytically pure reagents and GB/T 6682-2008 stipulated three
Grade water.
Impurity standard solution, test preparation and products required, did not indicate when the other requirements, according to HG/T 3696.2,
HG/T 3696.3 regulations of preparation.
6 Reagents
6.1 acetic acid - sodium acetate buffer solution
pH = 4 ~ 5.
6.2 phenol red solution
0.24g/L;
Preparation. Weigh 0.024g of phenol red and 0.12g of sodium carbonate, dissolved in water and diluted to 100mL.
6.3 chloramine T solution
2g/L;
Preparation. Weigh 0.20g chloramine-T [p-toluenesulfonyl sodium chloramine] dissolved in water and diluted to 100mL. Stored in a brown bottle, cold protection
Deposit. Save a period not exceeding one week.
6.4 thiosulfate solution
25g/L.
6.5 bromide standard solution I
1mL solution containing bromine (Br) 0.010mg, Extemporaneous;
Preparation. Pipette Pipette 1.00mL bromide standard solution according to HG/T 3696.2 formulated into 100mL volumetric flask, add
GB/T 23940-2021 | GB/T 23769-2009 | GB/T 23774-2009 | GB/T 23844-2019 | GB/T 23835.11-2009 | GB/T 23835.10-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23845-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 23845-2009
$105.00