GB/T 23722-2009Cranes -- Competency requirements for crane drivers (operators), slingers, signalers and assessors (English PDF)

Foreword

This standard is equivalent to using ISO 15513. Qualification "for crane drivers (operators), slingers, command staff and reviewers to 2000 Seeking "(in English).

This standard is equivalent translation ISO 15513:2000.

For ease of use, this standard made the following editorial changes.

--- "This International Standard" be replaced by "this standard";

--- Remove the foreword and introduction of international standards.

--- For the ISO 15513:2000 international standard references have been adopted as the equivalent of a standard, this standard use of these references Instead of the corresponding national standards with international standards, and the rest is not tantamount to the adoption of standard international standards, this standard is directly Reference (see Chapter 2 of this standard).

The Standard Appendix A, Appendix B and Appendix C are informative appendices.

The standard proposed by China Machinery Industry Federation.

This standard by the National Standardization Technical Committee crane (SAC/TC227) centralized.

This standard was drafted. Liaoning Provincial Academy for Security Sciences, Beijing Institute of lifting the transport machinery.

1 Scope

This standard gives the crane driver (operator), the selection of lifting work, commanding officers and assessors, training, evaluation and identification of areas Eligibility requirements.

This standard does not include lifting personnel, piling or pile pulling other additional eligibility requirements needed special operations.

Note 1. The Code of Conduct gives the crane operation GB/T 23723.1 (ISO 12480-1) in. However, we should also pay attention to other aspects of the officer's office Responsibility; training content included in the plan does not imply any change in a variety of responsibilities.

Note 2. the driver (operator) training, see GB/T 23720.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 6974.1 crane terminology - Part 1. General terms (GB/T 6974.1-2008, ISO 4306-1:2007, IDT) GB/T 6974.3 cranes Terminology - Part 3. Tower cranes (GB/T 6974.3-2008, ISO 4306-3:2003, IDT) GB/T 23720 (all parts) crane driver training [ISO 9926 (all parts), IDT] GB/T 23723.1-2009 safe use of cranes - Part 1. General (ISO 12480-1:1997, IDT) ISO 4306-2:1994 Cranes Terminology - Part 2. Mobile cranes

3 Terms and Definitions

GB/T 6974.1, ISO 4306-2:1994, GB/T 6974.3 and established in the following terms and definitions apply to this standard. Start the definition of heavy machine other relevant personnel see GB/T 23723.1.

Authorized official examination of qualified assessors and other applicants who were officially recognized qualification process.

Note. The qualification accreditation typically include provisions governing body of the training certificate or vocational educational institution or some other accreditation being provided by the institution Type approval procedure.

According to the eligibility criteria specified for the candidate to review the organization.

Control Code of Conduct on the candidate's qualifications evaluation process.

GB/T 23722-2009/ISO 15513:2000