GB/T 23364.6-2009Methods for chemical analysis of high purity indium oxide - Part 6: Determination of the loss on ignition - Gravimetric analysis (English PDF)
高纯氧化铟化学分析方法 第6部分:灼减量的测定 称量法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23364.6-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 19, 2009
Implementation date
January 1, 2010
Scope
GB/T 23364.6-2009 is the English-translated version of 高纯氧化铟化学分析方法 第6部分:灼减量的测定 称量法.
GB/T 23364.6-2009 is the Chinese standard "Methods for chemical analysis of high purity indium oxide - Part 6: Determination of the loss on ignition - Gravimetric analysis".
Its scope clause reads: This section GB/T 23364 specifies the method for determination of loss on ignition of high-purity indium oxide. This section applies to the determination of loss on ignition of high-purity indium oxide, measurement range (mass fraction) of 0.05% to 1.00%. Its clauses include method summary; equipment; sample.
Found what you need?
Document preview — GB/T 23364.6-2009
National Standard of the People's Republic of China
- ICS
- 77.120
- Classification
- H 66
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Equipment
- 4 Sample
1 Scope
This section GB/T 23364 specifies the method for determination of loss on ignition of high-purity indium oxide.
This section applies to the determination of loss on ignition of high-purity indium oxide, measurement range (mass fraction) of 0.05% to 1.00%.
2 Method summary
Sample was placed in a platinum crucible at a high temperature furnace is gradually heated up to 800 °C, burning to constant calculated based on the loss on ignition which reduces quality.
3 Equipment
3.1 Analysis of balance
a sense of the amount of 0.1mg.
3.2
high-temperature furnace.
4 Sample
The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.
Step 5 Analysis
5.1 Sample
Weigh 3.00g sample, accurate to 0.0001g.
5.2
Determination of the number of
Independently measured twice and averaged.
5.3 Determination
5.3.1
The sample (5.1) were plated at 800 °C constant burning and has a platinum crucible (including platinum cover) in.
5.3.2
platinum crucible placed in a high temperature furnace was slowly heated to 800 °C, burning 1h.
5.3.3 Remove the platinum crucible, coolish
The platinum crucible placed in a desiccator, cooled to room temperature and weigh.
5.3.4
platinum crucible placed in a high temperature furnace again, burning at 800 °C 30min. 5.3.3 according to the following operation until the constant.
Calculation results of the analysis of 6
Ignition loss mass fraction w1 and its value is expressed in%, according to formula (1).
W1 m1 = m1 2 m1 0 × 1-
100 (1)
Where.
M1 --- before burning sample and a platinum crucible (including platinum cover) mass in grams (g);
M1 2 --- after burning a sample and a platinum crucible (including platinum cover) mass in grams (g);
0 --- mass m1 of sample in grams (g).
7 precision
7.1 Repeatability
Found two independent test results obtained under repeatability conditions within the average range given below, these two test results […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23364.6-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23364.5-2009 — Methods for chemical analysis of high purity indium oxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry
GB/T 23364.4-2009 — Methods for chemical analysis of high purity indium oxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry
GB/T 23364.3-2009 — Methods for chemical analysis of high purity indium oxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry
GB/T 23364.6-2009
$90.00