Valid

GB/T 23364.5-2009Methods for chemical analysis of high purity indium oxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry (English PDF)

高纯氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23364.5-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 19, 2009

Implementation date

January 1, 2010

Scope

GB/T 23364.5-2009 is the English-translated version of 高纯氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法.

GB/T 23364.5-2009 is the Chinese standard "Methods for chemical analysis of high purity indium oxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry".

Its scope clause reads: This section GB/T 23364 specifies the determination of the amount of chlorine of high purity indium oxide. This section applies to the determination of the amount of chlorine in high purity indium oxide, the measurement range (mass fraction) of 0.025% to 0.80%. Its clauses include method summary; reagents; instrument; sample.

Found what you need?

Document preview — GB/T 23364.5-2009

National Standard of the People's Republic of China

ICS
77.120
Classification
H 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Method summary
  • 3 Reagents
  • 4 Instrument
  • 5 Sample

1 Scope

This section GB/T 23364 specifies the determination of the amount of chlorine of high purity indium oxide.

This section applies to the determination of the amount of chlorine in high purity indium oxide, the measurement range (mass fraction) of 0.025% to 0.80%.

2 Method summary

In chlorine-free environment, the sample was dissolved in nitric acid, ammonia separation matrix indium to eliminate its effects. Chloride in an acidic solution in quantitative substituted sulfur

Cyanate mercury thiocyanate ions released thiocyanate ions with an excess of ferric thiocyanate ions generated reddish brown iron compounds in the spectral

Absorbance was measured at 460nm wavelength photometer, thereby indirectly measuring the amount of chlorine.

3 Reagents

Unless otherwise stated, only recognized as analytical grade reagents and deionized water or equivalent purity; prepared and stored in a chlorine-free environment

Reagents and solutions.

3.1

nitric acid (rho about 1.42g/mL), pure class distinctions.

3.2

Ammonia (rho about 0.90g/mL), pure class distinctions.

3.3

nitric acid (1 + 1).

3.4

KCl, reference reagents, after 400 °C ~ 450 °C burn 30min, and cooled to room temperature in a desiccator.

3.5 ferric nitrate solution (300g/L)

Weigh 150g of ferric nitrate, placed in 500mL beaker, add 500mL nitric acid (3.3) is dissolved,

Mix well.

3.6 mercury thiocyanate solution (2g/L)

Weigh 1g mercuricthiocyanate placed in 500mL anhydrous ethanol, shake, place the filter in brown after 4h

Color bottle save. Prior to filtration, was added dropwise nitric acid (3.3) filter paper was washed 5 times with deionized water until neutral.

3.7 Storage chlorine standard solution

Weigh 2.1028g reference potassium chloride (3.4), placed in 250mL beaker, with the right amount of water to dissolve, moved

1000mL volumetric flask, dilute with water to volume, and mix. This solution 1mL 1mg containing chlorine.

3.8

Chlorine Standard Solution A. Pipette 10.00mL chlorine standard stock solution (3.7), placed in 100mL volumetric flask, dilute to the mark with water,

Mix well. This solution 1mL containing 100µg chlorine.

3.9 chlorine standard solution B

Pipette 25.00mL chlorine standard solution A (3.8), placed in 100mL volumetric flask, dilute to the mark with water, mix uniform. This solution 1mL containing 25µg chlorine.

4 Instrument

4.1

Spectrophotometer.

4.2

centrifuge.

5 Sample

The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.

Step 6 Analysis

6.1 Sample

Table 1 sample was weighed, accurate to 0.0001g.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 23364.5-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 23364.5-2009

$85.00