Valid

GB/T 23364.3-2009Methods for chemical analysis of high purity indium oxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry (English PDF)

高纯氧化铟化学分析方法 第3部分:锑量的测定 原子荧光光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23364.3-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 19, 2009

Implementation date

January 1, 2010

Scope

GB/T 23364.3-2009 is the English-translated version of 高纯氧化铟化学分析方法 第3部分:锑量的测定 原子荧光光谱法.

GB/T 23364.3-2009 is the Chinese standard "Methods for chemical analysis of high purity indium oxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry".

Its scope clause reads: This section GB/T 23364 specifies the method for the determination of antimony content of high-purity indium oxide. This section applies to the determination of the amount of high-purity indium antimony, the measurement range (mass fraction) of 0.00001% to 0.0080%. Its clauses include method summary; reagents; instrument; sample.

Found what you need?

Document preview — GB/T 23364.3-2009

National Standard of the People's Republic of China

ICS
77.120
Classification
H 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Method summary
  • 3 Reagents
  • 4 Instrument
  • 5 Sample

1 Scope

This section GB/T 23364 specifies the method for the determination of antimony content of high-purity indium oxide.

This section applies to the determination of the amount of high-purity indium antimony, the measurement range (mass fraction) of 0.00001% to 0.0080%.

2 Method summary

The sample is dissolved with hydrochloric acid, thiourea - ascorbic acid will be reduced to trivalent antimony advance in hydride generator, is reduced antimony potassium borohydride as hydrogen

Thereof, with argon gas was introduced into the quartz furnace atomizer, the fluorescence intensity measured on the atomic fluorescence spectrometer, calculate the amount of antimony.

3 Reagents

Unless otherwise stated, use only identified as gifted class pure reagents and secondary distilled water or equivalent to its purity.

3.1

hydrochloride (rho1.19g/mL).

3.2

sulfate (rho1.84g/mL).

3.3

HCl (1 + 1).

3.4 thiourea - ascorbic acid solution

Weigh 25g and 25g of thiourea AR AR ascorbic acid dissolved in 500mL of water, mixed

Uniform, the time is now equipped with.

3.5 solution of potassium borohydride (20g/L)

Weigh 10g potassium borohydride, dissolved in 500mL of potassium hydroxide solution (5g/L), and mix well. If

The precipitate is filtered and used. The time is now equipped with.

3.6

hydrochloric acid (1 + 19).

3.7 Antimony standard stock solution

Weigh 0.1000g antimony (mass fraction >=99.99%), placed in 100mL beaker. Sulfur was added 5mL

Acid, dissolved by heating, cooled and transferred to 1000mL volumetric flask, diluted with HCl (1 + 4) to the mark and mix. This solution containing 1mL

100µg antimony.

Antimony 3.8 Standard Solution A. Pipette 10.00mL antimony standard stock solution (3.7), placed in 200mL volumetric flask, (1 + 4) was diluted with HCl

To the mark, and mix. This solution 1mL containing 5µg antimony.

3.9 Antimony standard solution B

Pipette 10.00mL antimony standard solution A (3.8), placed in 100mL flask, diluted with HCl (1 + 4) to

Volume, and mix. This solution 1mL containing 500ng antimony.

3.10

argon, volume fraction >=99.99%.

4 Instrument

Atomic fluorescence spectrometer, equipped with antimony special hollow cathode lamp.

The atomic fluorescence spectrometer should meet the following specifications.

--- Stability. Zero drift <=5%, short-term stability RSD<=3% 30min inside;

--- The detection limit. Sb<=0.5ng/mL;

--- Linear curve. curve in 0 ~ 60ng/mL range, the correlation coefficient should >=0.995.

5 Sample

The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 23364.3-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 23364.3-2009

$85.00