GB/T 23364.2-2009Methods for chemical analysis of high purity indium oxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry (English PDF)
高纯氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23364.2-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 19, 2009
Implementation date
January 1, 2010
Scope
GB/T 23364.2-2009 is the English-translated version of 高纯氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法.
GB/T 23364.2-2009 is the Chinese standard "Methods for chemical analysis of high purity indium oxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry".
Its scope clause reads: This section GB/T 23364 specifies the determination of tin content of high-purity indium oxide. This section applies to the determination of high-purity indium tin amount, the measurement range (mass fraction) of 0.00005% to 0.0040%.
Its clauses include method summary; reagents; instruments and equipment; sample.
Found what you need?
Document preview — GB/T 23364.2-2009
National Standard of the People's Republic of China
- ICS
- 77.120
- Classification
- H 66
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Reagents
- 4 instruments and equipment
- 5 Sample
1 Scope
This section GB/T 23364 specifies the determination of tin content of high-purity indium oxide.
This section applies to the determination of high-purity indium tin amount, the measurement range (mass fraction) of 0.00005% to 0.0040%.
2 Method summary
Sample with sulfuric and nitric acid decomposition, heating evaporation to remove excess nitric acid in sulfuric acid medium, tin (IV) and Phenylfluorone - bromo - hexadecyl
Alkyl trimethyl ammonium forms a colored complex measured absorbance at the wavelength of 510nm at. Calculate the amount of tin.
Chromogenic solution, respectively containing 1g indium, 1mg magnesium, 0.5mg of copper, cadmium, zinc, aluminum, thallium, 0.1mg of lead, arsenic, antimony, iron does not interfere with tin
Determination.
3 Reagents
Unless otherwise stated, use only reagents and confirmed its purity deionized water or equivalent water analytically pure.
3.1
nitric acid (rho about 1.42g/mL), pure class distinctions.
3.2
sulfuric acid (rho about 1.84g/mL), pure class distinctions.
3.3
sulfate (1 + 3).
3.4
ethanol.
3.5
tartaric acid solution (50g/L).
3.6
potassium permanganate solution (10g/L).
3.7 ascorbic acid solution (20g/L)
Per 100mL ascorbic acid solution was added 5 drops of sulfuric acid (3.3), and mix. Store in a brown bottle (Stable for two weeks).
3.8
Phenylfluorone solution (0.4g/L). Weigh 0.08g Phenylfluorone in 195mL anhydrous ethanol (3.4) and 5mL sulfuric acid (3.3), and mix well. Store in a brown bottle.
3.9 bromo cetyl trimethyl ammonium hydroxide solution (30g/L)
Weigh 6g bromo cetyl trimethyl ammonium 200mL of absolute ethanol was added (3.4), dissolved by heating at 50 °C ~ 60 °C water bath, and mix. Store in a brown bottle.
3.10 Storage tin standard solution
Weigh 0.1000g metal tin (mass fraction >=99.99%), placed in 300mL beaker, add
10mL sulfuric acid (3.2), cover the surface of the pan, over low heat to dissolve. Remove the cooling, Chit 30mL, cooled to room temperature. Moved 1000mL capacity
Bottle with sulfuric acid (3.3) Wash the surface of the dish and cup wall and dilute to volume, and mix. This solution 1mL containing 100µg tin.
3.11 tin standard solution
Pipette 5.00mL tin standard stock solution (3.10), placed in 250mL volumetric flask, dilute sulfuric acid (3.3) to
Mark and shake. This solution 1mL containing 2µg tin.
4 instruments and equipment
Spectrophotometer.
5 Sample
The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23364.2-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23364.3-2009 — Methods for chemical analysis of high purity indium oxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry
GB/T 23364.1-2009 — Methods for chemical analysis of high purity indium oxide - Part 1: Determination of arsenic content - Atomic fluorescence spectrometry
GB/T 23364.4-2009 — Methods for chemical analysis of high purity indium oxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry
GB/T 23364.2-2009
$85.00