Valid

GB/T 23362.6-2009Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis (English PDF)

高纯氢氧化铟化学分析方法 第6部分:灼减量的测定 称量法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23362.6-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 19, 2009

Implementation date

January 1, 2010

Scope

GB/T 23362.6-2009 is the English-translated version of 高纯氢氧化铟化学分析方法 第6部分:灼减量的测定 称量法.

GB/T 23362.6-2009 is the Chinese standard "Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis".

Its scope clause reads: This section GB/T 23362 specifies the determination method of high-purity indium hydroxide loss on ignition. This section applies to the determination of loss on ignition of high purity indium hydroxide, the measurement range (mass fraction) was 16.00% ~ 18.00%. Its clauses include method summary; equipment; sample.

Found what you need?

Document preview — GB/T 23362.6-2009

National Standard of the People's Republic of China

ICS
77.120
Classification
H 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Method summary
  • 3 Equipment
  • 4 Sample

1 Scope

This section GB/T 23362 specifies the determination method of high-purity indium hydroxide loss on ignition.

This section applies to the determination of loss on ignition of high purity indium hydroxide, the measurement range (mass fraction) was 16.00% ~ 18.00%.

2 Method summary

Sample was placed in a platinum crucible at a high temperature furnace is gradually heated up to 800 °C, burning to constant, calculated based on the quality of ignition loss reduction.

3 Equipment

3.1 Analysis of balance

a sense of the amount of 0.1mg.

3.2

high-temperature furnace.

4 Sample

The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.

Step 5 Analysis

5.1 Sample

Weigh 1.00g sample, accurate to 0.0001g.

5.2

Determination of the number of

Independently measured twice and averaged.

5.3 Determination

5.3.1

The sample (5.1) were plated at 800 °C constant burning and has a platinum crucible (including platinum cover) in.

5.3.2

platinum crucible placed in a high temperature furnace, heated to about 280 °C, constant temperature 1h. Continue to heat up to 800 °C, burning 1h.

5.3.3

Remove the platinum crucible, coolish, a platinum crucible placed in a desiccator, cooled to room temperature and weigh.

5.3.4

platinum crucible placed in a high temperature furnace again, burning at 800 °C 30min. 5.3.3 according to the following operation until the constant.

Calculation results of the analysis of 6

Ignition loss mass fraction w1 and its value is expressed in%, according to formula (1).

W1 m1 = m1 2 m1 0 × 1-

100 (1)

Where.

M1 --- before burning sample and a platinum crucible (including platinum cover) mass in grams (g);

M1 2 --- after burning a sample and a platinum crucible (including platinum cover) mass in grams (g);

0 --- mass m1 of sample in grams (g).

7 precision

7.1 Repeatability

Found two independent test results obtained under repeatability conditions within the average range given below, these two test results […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 23362.6-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 23362.6-2009

$75.00