GB/T 23362.5-2009Methods for chemical analysis of high purity indium hydroxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry (English PDF)
高纯氢氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23362.5-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 19, 2009
Implementation date
January 1, 2010
Scope
GB/T 23362.5-2009 is the English-translated version of 高纯氢氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法.
GB/T 23362.5-2009 is the Chinese standard "Methods for chemical analysis of high purity indium hydroxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry".
Its scope clause reads: This section GB/T 23362 specifies the determination method of high-purity indium hydroxide in the amount of chlorine. This section applies to the determination of high-purity indium hydroxide in the amount of chlorine measurement range (mass fraction) of 0.025% to 0.80%. Its clauses include method summary; reagents; instrument; sample.
Found what you need?
Document preview — GB/T 23362.5-2009
National Standard of the People's Republic of China
- ICS
- 77.120
- Classification
- H 66
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Reagents
- 4 Instrument
- 5 Sample
1 Scope
This section GB/T 23362 specifies the determination method of high-purity indium hydroxide in the amount of chlorine.
This section applies to the determination of high-purity indium hydroxide in the amount of chlorine measurement range (mass fraction) of 0.025% to 0.80%.
2 Method summary
In chlorine-free environment, the sample was dissolved in nitric acid, ammonia separation matrix indium to eliminate its effects. Chloride in an acidic solution in quantitative substituted sulfur
Cyanate mercury thiocyanate ions released thiocyanate ions with an excess of ferric thiocyanate ions generated reddish brown iron compounds in the spectral
Absorbance was measured at 460nm wavelength photometer, thereby indirectly measuring the amount of chlorine.
3 Reagents
Unless otherwise stated, only recognized as analytical grade reagents and deionized water or equivalent purity; prepared and stored in a chlorine-free environment
Reagents and solutions.
3.1
nitric acid (rho about 1.42g/mL), pure class distinctions.
3.2
Ammonia (rho about 0.90g/mL), pure class distinctions.
3.3
nitric acid (1 + 1).
3.4
KCl, reference reagents, after 400 °C ~ 450 °C burn 30min, and cooled to room temperature in a desiccator.
3.5 ferric nitrate solution (300g/L)
Weigh 150g of ferric nitrate, placed in 500mL beaker, add 500mL nitric acid (3.3) is dissolved,
Mix well.
3.6 mercury thiocyanate solution (2g/L)
Weigh 1g mercuricthiocyanate placed in 500mL anhydrous ethanol, shake, place the filter in brown after 4h
Color bottle save. Prior to filtration, was added dropwise nitric acid (3.3) filter paper was washed 5 times with deionized water until neutral.
3.7 Storage chlorine standard solution
Weigh 2.1028g reference potassium chloride (3.4), placed in 250mL beaker, with the right amount of water to dissolve, moved
1000mL volumetric flask, dilute with water to volume, and mix. This solution 1mL 1mg containing chlorine.
3.8
Chlorine Standard Solution A. Pipette 10.00mL chlorine standard stock solution (3.7), placed in 100mL volumetric flask, dilute to the mark with water,
Mix well. This solution 1mL containing 100µg chlorine.
3.9 chlorine standard solution B
Pipette 25.00mL chlorine standard solution A (3.8), placed in 100mL volumetric flask, dilute to the mark with water, mix uniform. This solution 1mL containing 25µg chlorine.
4 Instrument
4.1
Spectrophotometer.
4.2
centrifuge.
5 Sample
The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23362.5-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23362.6-2009 — Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis
GB/T 23362.4-2009 — Methods for chemical analysis of high purity indium hydroxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry
GB/T 23362.3-2009 — Methods for chemical analysis of high purity indium hydroxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry
GB/T 23362.5-2009
$85.00