Valid

GB/T 23362.2-2009Methods for chemical analysis of high purity indium hydroxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry (English PDF)

高纯氢氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23362.2-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 19, 2009

Implementation date

January 1, 2010

Scope

GB/T 23362.2-2009 is the English-translated version of 高纯氢氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法.

GB/T 23362.2-2009 is the Chinese standard "Methods for chemical analysis of high purity indium hydroxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry".

Its scope clause reads: This section GB/T 23362 specifies the determination method of high-purity indium hydroxide in the amount of tin. This section applies to the determination of high-purity indium tin hydroxide, and measurement range (mass fraction) of 0.00005% to 0.0040%.

Its clauses include method summary; reagents; instruments and equipment; sample.

Found what you need?

Document preview — GB/T 23362.2-2009

National Standard of the People's Republic of China

ICS
77.120
Classification
H 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Method summary
  • 3 Reagents
  • 4 instruments and equipment
  • 5 Sample

1 Scope

This section GB/T 23362 specifies the determination method of high-purity indium hydroxide in the amount of tin.

This section applies to the determination of high-purity indium tin hydroxide, and measurement range (mass fraction) of 0.00005% to 0.0040%.

2 Method summary

Sample decomposition with sulfuric acid and nitric acid, heating evaporation to remove excess nitric acid in sulfuric acid medium, tin (IV) and Phenylfluorone - bromo - hexadecyl

Alkyl trimethyl ammonium form a colored complex, the absorbance was measured at 510nm wavelength. Calculate the amount of tin.

Chromogenic solution containing 1g respectively indium, 1mg magnesium, 0.5mg of copper, cadmium, zinc, aluminum, thallium, 0.1mg of lead, arsenic, antimony, iron, tin do not interfere

Determination.

3 Reagents

Unless otherwise stated, use only reagents and confirmed its purity deionized water or equivalent water analytically pure.

3.1

nitrate (rho1.42g/mL), pure class distinctions.

3.2

sulfate (rho1.84g/mL), pure class distinctions.

3.3

sulfate (1 + 3).

3.4

ethanol.

3.5

tartaric acid solution (50g/L).

3.6

potassium permanganate solution (10g/L).

3.7 ascorbic acid solution (20g/L)

Per 100mL ascorbic acid solution was added 5 drops of sulfuric acid (3.3), and mix. Store in a brown bottle (Stable for two weeks).

3.8

Phenylfluorone solution (0.4g/L). Weigh 0.08g Phenylfluorone in 195mL anhydrous ethanol (3.4) and 5mL sulfuric acid (3.3), and mix well. Store in a brown bottle.

3.9 bromo cetyl trimethyl ammonium hydroxide solution (30g/L)

Weigh 6g bromo cetyl trimethyl ammonium 200mL of absolute ethanol was added (3.4), dissolved by heating at 50 °C ~ 60 °C water bath, and mix. Store in a brown bottle.

3.10 Storage tin standard solution

Weigh 0.1000g metal tin (mass fraction >=99.99%), placed in 300mL beaker, add 10mL

Sulfuric acid (3.2), cover the surface of the pan, over low heat to dissolve. Remove the cooling, Chit 30mL, cooled to room temperature. Moved into 1000mL volumetric flask,

With sulfuric acid (3.3) Wash the surface of the dish and cup wall and dilute to volume, and mix. This solution 1mL containing 100µg tin.

3.11 tin standard solution

Pipette 5.00mL tin standard stock solution (3.10), placed in 250mL volumetric flask, dilute sulfuric acid (3.3) to

Mark and shake. This solution 1mL containing 2µg tin.

4 instruments and equipment

Spectrophotometer.

5 Sample

The specimen should be 105 °C ~ 110 °C drying 2h, placed in a desiccator to cool to room temperature.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 23362.2-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 23362.2-2009

$85.00