GB/T 23273.8-2009Methods for chemical analysis of cobalt oxalate - Part 8: Determination of nicke, copper, iron, zinc, aluminium, manganese, lead, arsenic, calcium, magnesium and sodium content - Inductively coupled plasma atomic emission spectrometry (English PDF)
草酸钴化学分析方法 第8部分:镍、铜、铁、锌、铝、锰、铅、砷、钙、镁、钠量的测定 电感耦合等离子体发射光谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23273.8-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 5, 2009
Implementation date
November 1, 2009
Scope
GB/T 23273.8-2009 is the English-translated version of 草酸钴化学分析方法 第8部分:镍、铜、铁、锌、铝、锰、铅、砷、钙、镁、钠量的测定 电感耦合等离子体发射光谱法.
GB/T 23273.8-2009 is the Chinese standard "Methods for chemical analysis of cobalt oxalate - Part 8: Determination of nicke, copper, iron, zinc, aluminium, manganese, lead, arsenic, calcium, magnesium and sodium content - Inductively coupled plasma atomic emission spectrometry".
Its scope clause reads: GB/T 23273 provisions of this part of the nickel, copper, iron, zinc, aluminum, manganese, lead, arsenic, calcium, magnesium, sodium determination of the amount of cobalt oxalate.
This section applies to nickel, copper, iron, zinc, aluminum, manganese, lead, arsenic, calcium, magnesium, sodium oxalate determining the amount of cobalt. Determination of the range in Table 1.
Table 1 measurement range of each element Element Name Measuring range /% Ni 0.001 ~ 0.01 Cu 0.001 ~ 0.01 Fe 0.001 ~ 0.01 Zn 0.001 ~ 0.01 Al 0.0005 ~ 0.005 Mn 0.001 ~ 0.01 Pb 0.001 ~ 0.01 As 0.0001 ~ 0.004 Ca 0.001 ~ 0.01 Mg 0.001 ~ 0.01 Na 0.001 ~ 0.01. Its clauses include method summary; reagents.
Found what you need?
Document preview — GB/T 23273.8-2009
National Standard of the People's Republic of China
- ICS
- 77.120.70
- Classification
- H 13
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Reagents
- 3.5 aqua regia
- 3.7 cobalt matrix solution
1 Scope
GB/T 23273 provisions of this part of the nickel, copper, iron, zinc, aluminum, manganese, lead, arsenic, calcium, magnesium, sodium determination of the amount of cobalt oxalate.
This section applies to nickel, copper, iron, zinc, aluminum, manganese, lead, arsenic, calcium, magnesium, sodium oxalate determining the amount of cobalt. Determination of the range in Table 1.
Table 1 measurement range of each element
Element Name Measuring range /%
Ni 0.001 ~ 0.01
Cu 0.001 ~ 0.01
Fe 0.001 ~ 0.01
Zn 0.001 ~ 0.01
Al 0.0005 ~ 0.005
Mn 0.001 ~ 0.01
Pb 0.001 ~ 0.01
As 0.0001 ~ 0.004
Ca 0.001 ~ 0.01
Mg 0.001 ~ 0.01
Na 0.001 ~ 0.01
2 Method summary
Cobalt oxalate in air on 300 °C ~ 400 °C calcination furnace after conversion into black oxide, dissolved in aqua regia. Media in aqua regia , Press the instrument optimized operating conditions and optimization of analytical lines, using similar standard solution and cobalt matrix matches the sample composition, electricity
Determination of cobalt oxalate of nickel, copper, iron, zinc, aluminum, manganese, lead, arsenic, calcium, magnesium, sodium content by inductively coupled plasma atomic emission spectrometry.
3 Reagents
The reagents used in addition to special requirements, the rest are pure class distinctions, solution preparation and analysis are secondary distilled water, after all storage solution preparation
Stored in plastic bottles.
3.1
hydrochloride (rho1.19g/mL).
Nitrate 3.2 (rho1.42g/mL).
3.3
HCl (1 + 1).
3.4
nitric acid (1 + 1).
3.5 aqua regia
3 parts of hydrochloric acid (3.1) + 1 part nitric acid (3.2).
3.6
cobalt (>=99.999%).
3.7 cobalt matrix solution
Weigh 3.200g cobalt (3.6) in 400mL beaker was slowly added to 30mL of nitric acid (3.4), heated to […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23273.8-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23273.7-2009 — Methods for chemical analysis of cobalt oxalate - Part 7: Determination of sulfate ion content - Combusition - Iodimetry
GB/T 23273.6-2009 — Methods for chemical analysis of cobalt oxalate - Part 6: Determination of chlorine ion content - Ion selective electrode method
GB/T 23273.5-2009 — Methods for chemical analysis of cobalt oxalate - Part 5: Determination of calcium, magnesium and sodium content - Flame atomic absorption spectrometry
GB/T 23273.8-2009
$125.00