GB/T 23273.7-2009Methods for chemical analysis of cobalt oxalate - Part 7: Determination of sulfate ion content - Combusition - Iodimetry (English PDF)
草酸钴化学分析方法 第7部分:硫酸根离子量的测定 燃烧-碘量法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23273.7-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 5, 2009
Implementation date
November 1, 2009
Scope
GB/T 23273.7-2009 is the English-translated version of 草酸钴化学分析方法 第7部分:硫酸根离子量的测定 燃烧-碘量法.
GB/T 23273.7-2009 is the Chinese standard "Methods for chemical analysis of cobalt oxalate - Part 7: Determination of sulfate ion content - Combusition - Iodimetry".
Its scope clause reads: GB/T 23273 provisions of this part of the determination of the amount of sulfate in cobalt oxalate. This section applies to the determination of the amount of sulfate in cobalt oxalate.
Measurement range. 0.002% to 0.02%. Its clauses include method summary; reagents; instruments and equipment.
Found what you need?
Document preview — GB/T 23273.7-2009
National Standard of the People's Republic of China
- ICS
- 77.120.70
- Classification
- H 13
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Reagents
- 4 instruments and equipment
1 Scope
GB/T 23273 provisions of this part of the determination of the amount of sulfate in cobalt oxalate.
This section applies to the determination of the amount of sulfate in cobalt oxalate. Measurement range. 0.002% to 0.02%.
2 Method summary
Sample in a muffle furnace at 500 °C high temperature burning with copper as flux at 1250 °C ~ 1300 °C burning furnace, which leads to oxygen, like
Products in the decomposition of sulphate sulfur dioxide with starch absorb fluid absorption. Starch as indicator, titrated with iodine titration solution to the standard blue
As the end point.
3 Reagents
3.1 fluxes
copper (w1 Cu>=99.95%, w1 S < 0.0002%, the diameter of 0.25mm ~ 0.50mm, prior to use in addition to a fine sandpaper
To the surface of the oxide, with alcohol cotton wipe clean, cut a length of about 50mm ~ 60mm standby).
3.2 Standard sample
copper standard (w1 S. 0.002% ~ 0.006%).
3.3 starch absorption solution
Weigh 0.05g starch, 4g 0.2g sodium chloride and potassium iodide in 500mL beaker, add water 250mL shake
Even after boiling 2min cooled to room temperature, the time is now equipped.
3.4 potassium dichromate sulfuric acid wash (50g/L)
Weigh 5g potassium dichromate, dissolved in a little water heating, cooling, sulfuric acid was added 100mL (1 + 9).
3.5
iodine standard stock solution [Ba (1/2I2) ~0.02mol/L]. Weigh 2.5g iodine and 20g potassium iodide in 500mL beaker, add
50mL water, stirring constantly so that the iodine is completely dissolved, filter the brown in 1000mL volumetric flask, constant volume of water.
3.6
standard iodine titration solution [Ba (1/2I2) ~0.0005mol/L].
3.6.1 preparation
15mL dispensing iodine standard stock solution (3.5), placed in a brown 500mL volumetric flask, 10g of potassium iodide was added to the water to
Yung, the time is now equipped with, and when calibrated with standard samples with sample analysis.
3.6.2 Calibration
Weigh the appropriate amount of standard copper triplicate samples were plated in porcelain boat. By 5.8 Procedure for calibration.
According to equation (1) to calculate the concentration of iodine standard solution.
Ba (1/2I2) = m1
· W1 S × 2
Vp × 32.06 × 10-3 (1)
Where.
Ba (1/2I2) --- the amount of substance concentration of iodine standard titration solution, expressed in moles per liter (mol/L);
Quality w1 S --- Sample score of sulfur;
Volume Vp --- titration consumption of iodine standard solution, in milliliters (mL);
M1 --- Quality standard sample in grams (g);
Taking an average of three calibration results. Titration volume within 0.2mL poor range, the mean value, or re-calibration.
4 instruments and equipment
4.1
muffle furnace.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23273.7-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23273.8-2009 — Methods for chemical analysis of cobalt oxalate - Part 8: Determination of nicke, copper, iron, zinc, aluminium, manganese, lead, arsenic, calcium, magnesium and sodium content - Inductively coupled plasma atomic emission spectrometry
GB/T 23273.6-2009 — Methods for chemical analysis of cobalt oxalate - Part 6: Determination of chlorine ion content - Ion selective electrode method
GB/T 23273.5-2009 — Methods for chemical analysis of cobalt oxalate - Part 5: Determination of calcium, magnesium and sodium content - Flame atomic absorption spectrometry
GB/T 23273.7-2009
$85.00