GB/T 23145-2008Short arc projector metal halide lamps (English PDF)
短弧投光金属卤化物灯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23145-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2008
Implementation date
September 1, 2009
Scope
GB/T 23145-2008 is the English-translated version of 短弧投光金属卤化物灯.
GB/T 23145-2008 is the Chinese standard "Short arc projector metal halide lamps". Its scope clause reads: This standard specifies the short arc cast light metal halide lamp (hereinafter referred to as lamp) model, the main dimensions, technical requirements, test methods, inspection regulations Then, signs, packaging, transportation and storage.
After the lamp with the corresponding matching lamps mainly used for stage, film shooting and screening, spot lighting. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 23145-2008
National Standard of the People's Republic of China
- ICS
- 29.140.30
- Classification
- K 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and model name
- 5 2 Technical Requirements
- 6 Test methods
- 7 Inspection rules
- 8 signs, packaging, transportation and storage
- Appendix A (normative) reference ballast basic parameters
1 Scope
This standard specifies the short arc cast light metal halide lamp (hereinafter referred to as lamp) model, the main dimensions, technical requirements, test methods, inspection regulations
Then, signs, packaging, transportation and storage.
After the lamp with the corresponding matching lamps mainly used for stage, film shooting and screening, spot lighting.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2423.6 Electrical and Electronic Products Environmental Testing Part 2. Test methods - Test Eb and guidance. Bump (GB/T 2423.6-1995, idt IEC 60068-2-29. 1987)
GB/T 2423.8 Electrical and Electronic Products Environmental Testing Part 2. Test methods Test Ed. Free fall (GB/T 2423.8-1995, idt IEC 60068-2-32.1990)
GB/T 2423.10 Electrical and Electronic Products Environmental Testing Part 2. Test methods Test Fc. Vibration (sinusoidal) (GB/T 2423.10-2008, IEC 60068-2-6.1995, IDT)
GB/T 2829 Periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 2900.65 Electrotechnical terminology Lighting (GB/T 2900.65-2004, IEC 60050 (845). 1987, MOD)
GB/T 13434 discharge lamps (excluding fluorescent lamps) Property Test Method
GB/T 15042 lamp for discharge lamps (excluding tubular fluorescent lamps) Ballast Performance requirements (GB/T 15042-2005,
IEC 60923.2001, IDT)
GB/T 18661 metal halide lamps (sodium scandium series)
Particular requirements for discharge lamps (excluding fluorescent lamps) Ballast. Part 10 control unit GB 19510.10 lamp (GB 19510.10-2004, IEC 61347-2-9.2003, IDT)
3 Terms and Definitions
GB/T 2900.65 and GB/T 18661 is determined and the following terms and definitions apply to this standard.
3.1
Lamp ignition to the luminous flux value 10h measured.
3.2
The lamp start properly and stable ignition of the minimum supply voltage rms.
3.3
Lamp at rated supply voltage, the time required to start to reach steady state operation from.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23145-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 23145-2008
$195.00