GB/T 23141-2008Long-arc xenon lamps for photo-chemistry and photo-aging (English PDF)
光化学、光老化长弧氙灯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23141-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2008
Implementation date
September 1, 2009
Scope
GB/T 23141-2008 is the English-translated version of 光化学、光老化长弧氙灯.
GB/T 23141-2008 is the Chinese standard "Long-arc xenon lamps for photo-chemistry and photo-aging". Its scope clause reads: This standard specifies the long arc xenon lamp (hereinafter referred to as lamp) model, the main dimensions, technical requirements, test methods, inspection rules, marks, packages Loading, transport and storage.
This series of light radiation energy distribution very similar to daylight, for daylight simulation is often used as a light source, in photochemistry, photo-aging field Widely used. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 23141-2008
National Standard of the People's Republic of China
- ICS
- 29.140.30
- Classification
- K 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and model name
- 5 2 Technical Requirements
- 7 Inspection rules
- 8 signs, packaging, transportation, storage
- Appendix A (normative) reference ballast basic parameters
1 Scope
This standard specifies the long arc xenon lamp (hereinafter referred to as lamp) model, the main dimensions, technical requirements, test methods, inspection rules, marks, packages
Loading, transport and storage.
This series of light radiation energy distribution very similar to daylight, for daylight simulation is often used as a light source, in photochemistry, photo-aging field
Widely used.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2423.6 Environmental testing for electric and electronic products Part 2. Test methods - Test Eb and guidance. Bump (GB/T 2423.6-1995, idt IEC 60068-2-29. 1987)
GB/T 2423.8 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (GB/T 2423.8-
1995, idt IEC 60068-2-32.1990)
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (GB/T 2423.10-2008, IEC 60068-2-6.1995, IDT)
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 2900.65 Electrotechnical terminology Lighting (GB/T 2900.65-2004, IEC 60050 (845). 1987, MOD)
GB/T 13434 discharge lamps (excluding fluorescent lamps) Property Test Method
GB/T 15042 lamp for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements for ballasts (GB/T 15042-2008,
IEC 60923.2005, IDT)
GB/T 18661 metal halide lamps (Scandium sodium series)
Particular requirements for discharge lamps (excluding fluorescent lamps) Ballast. Part 10 GB 19510.10 lamp control device (GB 19510.10-2008, IEC 61347-2-9.2006, IDT)
QB2274 Categories electric light source and type designation
3 Terms and Definitions
GB/T 2900.65 and GB/T 18661 and determined the following terms and definitions apply to this standard.
3.1
After 10h lamp aging measured flux.
3.2
When the lamp operation under specified conditions, the performance parameters should reach a minimum value.
3.3
Lamp life refers to the luminous flux down to 70% of the ignition time of the initial luminous flux limits.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23141-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 23141-2008
$195.00