GB/T 22763-2008Electrical accessories - Big size sealed screwed plug (English PDF)

1 Scope

This standard specifies as an industrial indoor or outdoor use with fixed or mobile electrical devices out cable plugs with sealing

Claim.

This standard applies to seal the cable outer diameter of 48mm ~ 100mm, the sealing plug is fitted on the electric apparatus used.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 197-2003 common thread tolerance (ISO 965-1.1998, MOD)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987)

GB 4208-2008 enclosure class (Ip Code) (IEC 60529.2001, IDT)

GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11. Glowing/hot-wire based test methods to

Glow-wire flammability test method for products (IEC 60695-2-11.2000, IDT)

GB 7251.4-2006 Low-voltage switchgear and control equipment - Part 4. equipment for construction sites (ACS) of

Particular requirements (IEC 60439-4.2004, IDT)

GB/T 16422.2-1999 Plastics - Methods of exposure to laboratory light sources - Part 2. Xenon arc lamp (idt ISO 4892.1.1994)

IEC 60068-2-11. 1981 Basic environmental testing procedures - Part 2. Tests - Test Ka. Salt

IEC 60068-2-30. 1980 Basic environmental testing procedures - Part 2. Tests - Test Db and guidance. Damp heat (12h +

12h cycle) and its Amendment 1 (1985)

3 Terms and Definitions

The following terms and definitions for use in the present standard.