GB/T 22680-2008Jig saws (English PDF)

1 Scope

This standard specifies the basic parameters and jigsaw types, technical requirements, test methods and inspection rules and other requirements.

This standard applies to general environmental conditions, wood, metal, plastic, rubber plate that line or curve sawing Handheld post

DC or single-phase series jigsaw.

This standard does not apply to single-phase squirrel cage induction motor drive curve saws and electric saws and knives.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB 755-2008 rotating motor fixed and performance (IEC 60034-1.2004, IDT)

GB 1002 Household and similar single-phase plugs and socket type, basic parameters and dimensions

GB 2099.1 plugs and sockets for household and similar purposes - Part 1. General Requirements (GB 2099.1-2008, IEC 60884-1.

2006, E3.1, MOD)

The first part of the GB 3883.1-2005 Safety hand-held power tools. General requirements (IEC 60745-1.2003, Ed3.2,

IDT)

The second part of the GB 3883.11-2005 Safety hand-held power tools. reciprocating saws (jig saw, saber saws) special requirements (IEC 60745-2-11.2003, IDT)

GB 4343.1-2003 Electromagnetic compatibility appliances, electric tools and similar apparatus - Part 1. Emission (IEC /CISPR14-12000, IDT)

GB/T 4583-2007 Power Tools Noise Measurement Engineering method (ISO 3744.1994, NEQ)

GB/T 5013.4-2008 rated voltage of 450/750V and below rubber insulated cables Part 4. Cords and flexible cables (IEC 60245-4.2004, IDT)

GB/T 5023.5-2008 rated voltage of 450/750V and below PVC insulated cables Part 5. Flexible cables (cords) (IEC 60227-5.2003, IDT)

GB/T 9088-2008 model designation Power Tools

GB 17625.1-2003 Electromagnetic compatibility - Limits for harmonic current emissions (equipment input current <=16A) (IEC 61000-3-2.2001, IDT)

GB 17625.2-2007 Electromagnetic compatibility limits of the rated current per phase <=16A and unconditional access to public low-voltage equipment

Voltage power supply system generated voltage fluctuations and flicker limits (IEC 61000-3-3.2005, IDT)

GB 19212.1-2008 power transformers, power supplies, reactors and similar products - Part 1. General requirements and tests (IEC 61558-1.2005, IDT)

Part 7 GB 19212.7-2006 Safety of power transformers, power supply units and similar products. general purpose safety isolating transformer

Particular requirements for the pressure (IEC 61558-2-6.1997, MOD)

3 basic parameters and type

Basic parameters 3.1 Jigsaw to comply with Table 1.