Valid

GB/T 22317.1-2008Piezoelectric filters of assessed quality -- Part 1: Generic specification (English PDF)

有质量评定的压电滤波器第1部分：总规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 22317.1-2008 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

August 6, 2008

Implementation date

January 1, 2009

Scope

GB/T 22317.1-2008 is the English-translated version of 有质量评定的压电滤波器第1部分：总规范.

GB/T 22317.1-2008 — This section GB/T 22317 specifies the test side of the capability approval procedures or qualification approval procedures for assessing the quality of the piezoelectric filter Law and general requirements.

Found what you need?

Document preview — GB/T 22317.1-2008

National Standard of the People's Republic of China

ICS: 31.140; 31.160
Classification: L 21

Issued by: Standardization Administration of China

Introduction
1 General
1.1 Scope
1.2 Normative references
1.3 Priority
2 2 terms and general requirements
2.1 Overview
2.2 Terms and Definitions
2.3 Priority ratings and characteristics
2.4 Mark
3 Quality assessment procedures
3.1 The initial stage of manufacture
3.2 10 structurally similar elements
3.3 Subcontracting
3.4 Merge element
3.5 Factory approved

Foreword

GB/T 22317 "Piezoelectric filters of assessed quality" is divided into the following parts.

--- Part 1. Generic specification;

--- Part 2. Guide;

--- Part 3. Sectional specification - Capability approval;

--- Part 3-1. Blank detail specification - Capability approval.

This section GB/T Part of 122,317.

This section identical with IEC 60368-1:2000 "Piezoelectric filters of assessed quality - Part 1. Generic specification" (in English).

For ease of use, this section made the following editorial changes.

--- Delete foreword international standards;

--- The Normative references to national standards instead of the file in our part of the IEC standard with corresponding.

This section proposed by the People's Republic of China Ministry of Information Industry.

This part of the National frequency control and selection Standardization Technical Committee centralized piezoelectric device.

This section drafted by. China Electronic Components Industry Association Branch of the piezoelectric crystal.

1 General

1.1 Scope

This section GB/T 22317 specifies the test side of the capability approval procedures or qualification approval procedures for assessing the quality of the piezoelectric filter Law and general requirements.

1.2 Normative references

The following documents contain provisions which, through reference GB/T 22317 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2421-1999 Environmental testing for electric and electronic products - Part 1. General (idt IEC 60068-1. 1988) GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (idt IEC 60068-2-1:1990) GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2. Test methods Test B. high temperature (idt IEC 60068-2-2. 1974) GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78:2001, IDT) GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db Damp (12h + 12h cycle) (IEC 60068-2-30:2005, IDT) GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987) GB/T 2423.6-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Eb and guidance. Bump (Idt IEC 60068-2-29. 1987) GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (idt IEC 60068-2-32:1990) GB/T 2423.10-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Fc and guidance. Vibration (n Chord) (idt IEC 60068-2-6. 1982) GB/T 2423.15-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Ga and guidance. Acceleration, steady state Degree (idt IEC 60068-2-7. 1983) GB/T 2423.16-1999 Environmental testing for electric and electronic products Part 2. Test methods Test J and guidance. Mould growth (Idt IEC 60068-2-10. 1988) GB/T 2423.18-2000 Environmental testing for electric and electronic products Part 2. Test methods - Test Kb. Salt mist, cyclic (chloride Sodium) (idt IEC 60068-2-52:1996) GB/T 2423.21-1991 electric and electronic products environmental testing procedures Test M. Low Voltage Test Method (neqIEC 60068-2-13. 1983) GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT) GB/T 22317.1-2008/IEC 60368-1:2000

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 22317 · IEC 60068 · IEC 60368

How to Download GB/T 22317.1-2008

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.