Valid

GB/T 21709.17-2009Standardized manipulations of acupuncture and moxibustion - Part 17: Nose acupuncture (English PDF)

针灸技术操作规范 第17部分:鼻针

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 21709.17-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 6, 2009

Implementation date

August 1, 2009

Scope

GB/T 21709.17-2009 is the English-translated version of 针灸技术操作规范 第17部分:鼻针.

GB/T 21709.17-2009 is the Chinese standard "Standardized manipulations of acupuncture and moxibustion - Part 17: Nose acupuncture". Its scope clause reads: This part of GB/T 21709 specifies the terminology and definition of nose needles, procedures and requirements, precautions and contraindications.

This section applies to nasal needle operation. Its clauses include terms and definitions; operating procedures and requirements.

Found what you need?

Document preview — GB/T 21709.17-2009

National Standard of the People's Republic of China

ICS
11.020
Classification
C 05

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 terms and definitions
  • 3 operating procedures and requirements
  • 3.1 Preparation before surgery
  • 3.2 method of operation
  • 3.3 post-treatment

1 Scope

This part of GB/T 21709 specifies the terminology and definition of nose needles, procedures and requirements, precautions and contraindications.

This section applies to nasal needle operation.

2 terms and definitions

The following terms and definitions apply to this part of GB/T 21709.

2.1

In the nose within the specific acupuncture points on the application of acupuncture, to treat the disease method.

3 operating procedures and requirements

3.1 Preparation before surgery

3.1.1 Needle selection

Selection of the diameter of 0.22mm ~ 0.28mm, length 15mm ~ 25mm needle, the selected needle needle body should be smooth, no rust,

Lee, no barbs, needle handle should be solid, no loosening.

3.1.2 Location selection

According to the disease in the nose to select the appropriate points in the hole to find sensitive points. Nose needle acupuncture point name, located in Appendix A. 1,

The location of the nasal needle is shown in Fig. 1. See Appendix B for how to find the nose sensitive points.

3.1.3 position selection

Choose the patient comfortable, the doctor easy to operate the position to the supine position is appropriate.

3.1.4 Environmental requirements

Should pay attention to environmental hygiene, to avoid pollution.

3.1.5 disinfection
3.1.5.1 Needle disinfection

should be selected high pressure disinfection method. Should choose a disposable needle.

3.1.5.2 site disinfection

75% ethanol or 0.5% iodophor cotton ball in the surgical site of disinfection. Strong stimulation of the site is appropriate 0.5% iodophor cotton

Ball disinfection.

3.1.5.3 surgeon disinfection

doctors hands with soap and water to clean, and then wipe with 75% ethanol cotton balls.

3.2 method of operation

3.2.1 needle

According to the location of the acupuncture points, using oblique thorns or flat thorns, quickly pierced the selected points, acupuncture depth depending on the specific location, to

2mm ~ 5mm is appropriate

3.2.2 line needle and needle

Twist to light, until the patient has acid, hemp, swelling, pain or tears, sneezing and other needle sense, the needle 10min ~ 30min.

3.2.3 out of the needle

Quickly pull the needle out of the needle.

3.3 post-treatment

Press pinholes with sterile dry cotton balls or dry cotton swabs.

GB/T 36388-2018 | YBB 2027-2012 | YBB 6006-2012 | GB/T 21709.15-2021 | GB/T 21709.21-2013 | GB/T 21709.16-2013 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 21709.17-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 21709.17-2009

$145.00