GB/T 21056-2007Specification for adjustable speed drive systems of electricity conservation with VF for fans and pumps (English PDF)
风机、泵类负载变频调速节电传动系统及其应用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21056-2007 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 13, 2007
Implementation date
February 1, 2008
Scope
GB/T 21056-2007 is the English-translated version of 风机、泵类负载变频调速节电传动系统及其应用技术条件.
GB/T 21056-2007 is the Chinese standard "Specification for adjustable speed drive systems of electricity conservation with VF for fans and pumps".
Its scope clause reads: This standard specifies the fans, pumps load frequency control energy-saving drive system application conditions, technical requirements, test methods and discrimination and Evaluation.
This standard applies to 660V and below voltage, 50Hz three-phase AC power supply, motor power 315kW and below the wind Machine, pump load frequency control power-saving drive system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 21056-2007
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the fans, pumps load frequency control energy-saving drive system application conditions, technical requirements, test methods and discrimination and
Evaluation.
This standard applies to 660V and below voltage, 50Hz three-phase AC power supply, motor power 315kW and below the wind
Machine, pump load frequency control power-saving drive system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (idt IEC 60068-2-1.1990)
GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2. Test methods Test B. high temperature (idt IEC 60068-2-2.
1974)
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (GB/T 2423.3-2006, IEC 60068-2-78.2001, IDT)
GB/T 2423.21 electric and electronic products environmental testing procedures Test M. Low air pressure test method (GB/T 2423.21-
1991, neqIEC 60068-2-13. 1983)
GB/T 3797 Electric Control Equipment
GB 4943-2001 Safety of information technology equipment (idt IEC 60950.1999)
GB/T 5080.7 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of test plans (GB/T 5080.7-1986, idt IEC 60605-7. 1978)
GB/T 12668.2 speed electric drive systems - Part 2. General requirements for low voltage adjustable frequency ac power drive systems rating
Provisions (GB/T 12668.2-2002, IEC 61800-2.1998, IDT)
GB/T 13466 AC driven fan (pump, air compressor) General economic operation
GB /Z17625.6-2003 electromagnetic compatibility limits rated current greater than 16A devices in low-voltage power supply systems
Harmonic current limit (IEC TR61000-3-4.1998, IDT)
GB/T 17626.4-1998 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (Idt IEC 61000-4-4.1995)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Application of frequency conversion technology and microcomputer control technology and new control theory, based on the actual operating conditions of the system, track […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 29314-2023Specification for the reconstruction of motor system for energy-saving
- GB/T 15913-2022Monitoring and testing for energy saving of fan's unit and distribute tube system
- LY/T 1862-2022Energy-saving technical specifications for pneumatic conveying and dust removal systems in the wood industry
- GB/T 13469-2021Economical operation for centrifugal, mixed flow and axial flow pump systems
- GB/T 41013-2021Evaluation of energy performance of motor system
- LY/T 1862-2009Energy-saving technical specifications for pneumatic conveying and dust removal systems in the wood industry
Similar standards
How to Download GB/T 21056-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 21056-2007
$105.00