Valid

GB/T 20716.1-2025Road vehicles - Connectors for the electrical connection of towing and towed vehicles(7-pole) - Part 1: Connectors for braking systems and running gears of vehicles with 24 V nominal supply voltage (English PDF)

道路车辆 牵引车和挂车之间的电连接器(7芯)第1部分:24 V标称电压车辆的制动系统和行走系的连接

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for GB/T 20716.1-2025 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Recommended

Issue date

August 1, 2025

Implementation date

February 1, 2026

Scope

GB/T 20716.1-2025 is the English-translated version of 道路车辆 牵引车和挂车之间的电连接器(7芯)第1部分:24 V标称电压车辆的制动系统和行走系的连接.

GB/T 20716.1-2025 is the Chinese standard "Road vehicles - Connectors for the electrical connection of towing and towed vehicles(7-pole) - Part 1: Connectors for braking systems and running gears of vehicles with 24 V nominal supply voltage".

Its scope clause reads: This Document specifies the dimensional characteristics, contact distribution, testing and requirements for a 7-pole electrical connector for the braking systems and running gears between a towing and towed vehicles with a nominal voltage of 24 V. It also specifies a storage socket for storing the plug when the plug and socket are separated.

This Document applies to Category N towing vehicles with a nominal voltage of 24 V and is for reference only for other vehicles. Its clauses include terms and definitions; dimensional characteristics; connector application.

It was issued by the State Administration for Market Regulation on 2025-08-01 and took effect on 2026-02-01.

Found what you need?

Document preview — GB/T 20716.1-2025

National Standard of the People's Republic of China

ICS
43.040.10

Issued by: State Administration for Market Regulation

Contents

  • Foreword...3
  • Introduction...5
  • 1 Scope...6
  • 2 Normative References...6
  • 3 Terms and Definitions...7
  • 4 Dimensional Characteristics...7
  • 4.1 General...7
  • 4.2 Plug...7
  • 4.3 Socket...8
  • 4.4 Storage socket...8
  • 5 Connector Application...8
  • 5.1 General requirements...8
  • 5.2 Contact distribution...12
  • 5.3 Contact marking...13
  • 5.4 Posts...13
  • 5.5 Connecting cables...13
  • 6 Tests and Special Requirements...14
  • 6.1 General requirements...14
  • 6.2 Prevention of mis-mating...14
  • 6.3 Connection and disconnection...14
  • 6.4 Durability...14

1 Scope

This Document specifies the dimensional characteristics, contact distribution, testing and requirements for a 7-pole electrical connector for the braking systems and running gears between a towing and towed vehicles with a nominal voltage of 24 V. It also specifies a storage socket for storing the plug when the plug and socket are separated.

This Document applies to Category N towing vehicles with a nominal voltage of 24 V and is for reference only for other vehicles.

2 Normative References

The provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document.

ISO 4091 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – Definitions, tests and requirements

NOTE. GB/T 5053.3-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions tests and requirements (ISO 4091.2003, IDT)

ISO 4141 (all parts) Road vehicles – Multi-core connecting cables

NOTE. GB/T 5054 (all parts) Road vehicles - Multi-core connecting cables [ISO 4141 (all parts)]

ISO 7638-2 Road vehicles – connectors for the electrical connection of towing and towed vehicles – Part 2.Connectors for braking systems and running gear of vehicles with 12V nominal supply voltage

NOTE. GB/T 20716.2-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2.Connectors for braking systems and running gears of vehicles with 12V nominal supply voltage (ISO 7638-2.2003, IDT)

ISO 11992-1 Road vehicles – Interchange of digital information on electrical connections between towing and towed vehicles – Part 1.Physical and data-link layers

NOTE. GB/T 43192.1-2023 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1.Physical and data-link layers (ISO 11992-

1.2019, IDT)

ISO 11992-2 Road vehicles – Interchange of digital information on electrical connections between towing and towed vehicles – Part 2.Application layer for brakes and running gear

ISO 12098 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 15-pole connector for vehicles with 24V nominal supply voltage

NOTE. GB/T 20717-2024 Road vehicles - Connectors for the electrical connection of towing and towed vehicles (15-pole) - 15-pole connector for vehicles with 24 V nominal supply voltage (ISO

12098.2020, IDT)

3 Terms and Definitions

For the purposes of this Document, the terms and definitions given in ISO 4091 apply.

The websites for terminology databases used for standardization maintained by ISO and IEC are as follows.

4 Dimensional Characteristics

4.1 General

Details not specified in this Document are left to the discretion of the manufacturer.

The contacts shall be movable so as to adjust to the reference position when the plug and socket are mated.

4.2 Plug

The dimensions of the plug shall be as shown in Figure 1.

The design of the latch shall ensure the space required for the screw to secure the socket (see

Figure 2).

4.3 Socket

The dimensions of the socket shall be as shown in Figure 2.

The socket cover shown in the figure is in the open position; it shall automatically close when the plug is removed.

4.4 Storage socket

The dimensions of the storage socket shall be as shown in Figure 3.

The socket cover shown in the figure is in the open position; it shall automatically close when the plug is removed.

5 Connector Application

5.1 General requirements

Spiral cable assemblies are used on semi-trailer towing vehicles (saddle tractors). Regardless of whether the tractor is connected to a semi-trailer, the cable assembly can be connected to the tractor's circuit through the socket or directly (see Figure 4).

Non-spiral cable assemblies are used on drawbar trailers; the socket shall be installed on the rear of the full trailer truck (see Figure 4).

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 20716.1-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
14 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 20716.1-2025

$255.00