GB/T 19760.3-2008CC-Link ( Control & communication Link ) specifications - Part 3: CC-Link profile (English PDF)
CC-Link控制与通信网络规范 第3部分：CC-Link 行规
This is a limited preview
Buy now to download the full PDF (116 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19760.3-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 15, 2008
Implementation date
June 1, 2009
Scope
GB/T 19760.3-2008 is the English-translated version of CC-Link控制与通信网络规范 第3部分：CC-Link 行规.
GB/T 19760.3-2008 is the Chinese standard "CC-Link ( Control & communication Link ) specifications - Part 3: CC-Link profile". Its scope clause reads: GB/T 19760 provisions of this part of the CC-Link profiles.
This section applies to automation and control. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 19760.3-2008
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 CSP file defines
- 4.1 CSP file name
- 4.2 CSP file structure
- 4.3 file section
- 4.4 equipment section
- 4.5 RX and RY section 9 paragraph
- 4.6 RWr and RWw paragraph
- 4.7 CSP file Example
- 5 Memory Mapping
- 5.1 PLC
- 5.2 Analog - digital converter module
- 5.3 Digital - analog converter module
- 5.4 High-speed counter
- 5.5 Location
- 5.6 HMI
- 5.7 ID module
- 5.8 S-Link gateway
- 5.11 temperature controller
- 5.12 bar code reader
- 5.13 Weighing Indicator
- 5.15 UNI-WIRE Gateway
- 5.16 AnyWireBus Gateway
- 5.17 mass flow controller device
- 5.18 Servo System
- 5.19 AnyBus interface
- 5.20 ionization gauge
- 5.21 CNC
- 1 CSP file structure Figure
- 6 high 8 bits and lower 8 bits of data definitions
- 8 words Register Definition Example
- 9 Word Register Definition Example
- 11 Examples of positioning module RWw section
- 12 analog - digital converter module instance RWw section
- 13 analog - digital converter module instance RWw bit register section
- 18 selection parameter table entry segment/19 items
1 Scope
GB/T 19760 provisions of this part of the CC-Link profiles.
This section applies to automation and control.
2 Normative references
The following documents contain provisions which, through reference GB/T 19760 in this section constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 5271.1 Information technology - Vocabulary - Part 1. Basic terminology (GB/T 5271.1-2000, eqv ISO /IEC 2382-1.
1993)
GB/T 5271.5 Information technology - Vocabulary - Part 5. Data Representation (GB/T 5271.5-2008, ISO 2382-5.1999, IDT)
GB/T 5271.8 Information technology - Vocabulary - Part 8. Security (GB/T 5271.8-2001, idt ISO /IEC 2382-8.1998)
GB/T 5271.9 Information technology - Vocabulary - Part 9. Data communication (GB/T 5271.9-2001, eqv ISO /IEC 2382-9.
1995)
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1
It represents a bit of status information --- 0 (OFF) or 1 (ON).
3.2
Update periodically data communication method via CC-Link network.
3.3
A circular communication, in which communication by dividing a communication packet into a plurality of blocks of data transmitted to increase the size, so that the
Each logical loop station communication link maximum capacity to 128-bit and 64-word.
3.4
In the extended cyclic transmission (Ver.2.00), the extended-cycle capacity can be set to 2 times the data capacity of a conventional cycle, four times or eight times.
3.5
To enter the display mode and can identify people who can be entered in the information exchange between man and machine equipment.
3.6 With the master station n
1 transmission cycle and the instantaneous transmission stations. Abbreviations used in this section ID (InteligentDevice) to represent.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 116 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 19760.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19760.4-2008 — CC-Link (Control & communication Link) specifications - Part 4: CC-Link/LT specifications
GB/T 19760.2-2008 — CC-Link (Control & communication Link) specifications - Part 2: CC-Link implementation
GB/T 19760.1-2008 — CC-Link ( Control & communication Link ) specification - Part 1: CC-Link overview, protocol
Secure payment via Stripe
Payments accepted
GB/T 19760.3-2008
$2,000.00