GB/T 19545.5-2021Assistive products for walking,manipulated by one arm—Requirements and test methods—Part 5: Walking sticks and canes with seat (English PDF)
单臂操作助行器具 要求和试验方法 第5部分:带座手杖
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19545.5-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 26, 2021
Implementation date
November 26, 2021
Scope
GB/T 19545.5-2021 is the English-translated version of 单臂操作助行器具 要求和试验方法 第5部分:带座手杖.
GB/T 19545.5-2021 is the part of the Chinese series on walking aids manipulated by one arm that covers walking sticks and canes with a seat.
It sets the requirements - the static and fatigue strength, the stability of the seat, the locking of the legs, the ferrule, the grip and the sharp edges - the test methods, the inspection rules, the marks and instructions for use and the content of the test report.
It applies to seat canes for users from 35 kg to 100 kg. Makers of walking aids, rehabilitation services and test bodies use it. Issued on 26 November 2021, it applies from the same date.
Found what you need?
Document preview — GB/T 19545.5-2021
National Standard of the People's Republic of China
- ICS
- 11.180
- Classification
- C 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
This document is Part 5 of GB/T 19545.GB/T 19545 "Requirements and test methods for single-arm operation mobility aids" has been issued Fabric the following parts.
---Part 1: Elbow crutches;
---Part 2: Axillary crutches;
---Part 4: Three-legged or multi-legged cane;
---Part 5: Cane with seat.
Introduction
One-arm-operated walking aids are single-arm-operated walking aids that are used individually or in pairs, and are commonly used in people with walking difficulties.
In GB/T 16432-2016 "Classification and Terminology of Rehabilitation Assistive Devices", single-arm walking aids include canes, elbows (crutches), axillary (crutches), and multiple Foot crutches, canes with seat, etc. ISO issued only 2 standards for single-arm operation mobility aids. ISO 11334-1:2007 "Single-arm operation Mobility aid requirements and test methods-Part 1: Elbow crutches and ISO 11334-4:1999 "Requirements and test Test Method Part 4: Three-legged or Multi-legged Cane, my country has adopted the national standards GB/T 19545.1-2012 and GB/T 19545.1-2012.
GB/T 19545.4-2008.Axillary crutches is an independent national standard, which is the second part of the GB/T 19545 series, namely GB/T 19545.2- 2009.There is no Part 3 in the ISO 11334 series of standards. In order not to affect the sequence of the ISO 11334 series of standards, it is planned to use a cane with a seat as a Part 5 of the GB/T 19545 series. Therefore, the GB/T 19545 series is planned to consist of the following parts.
---Part 1: Elbow crutches;
---Part 2: Axillary crutches;
---Part 4: Three-legged or multi-legged cane;
---Part 5: Cane with seat.
Due to illness, injury, and disability, it will be difficult to walk, especially the aging population. Most elderly people will walk more and more as they age.
The more difficult it is, you need to sit down and rest after walking for a while. Obviously, a simple walking stick can no longer meet the requirements, so the market has begun to appear It can be used as a cane, and can also be used as a cane with a seat. However, the first edition of the international standard ISO 9999 "Disability Neither "Classification of Human Assistive Devices" and the second edition of ISO 9999 published in.1998 did not have a cane with a seat. Until the third edition released in.2002
ISO 9999 has been adopted as the national standard GB/T 16432-2004 "Classification and Terminology of Assistive Devices for the Disabled".
Seat cane. This document specifies the requirements and test methods for the cane with a seat, so that the product testing can be based on evidence.
1 Scope
This document specifies the requirements, test methods, inspection rules, signs and instructions for use, and inspection reports for walking sticks with a seat.
This document applies to canes with a seat used by users weighing 35kg to 100kg.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 10357.2 Test of mechanical properties of furniture Part 2: Stability of chairs and stools
GB/T 10357.3-2013 Furniture Mechanical Performance Test Part 3: Chairs and Stools Strength and Durability
QB/T 4458-2013 Folding chair
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Walkingsticksandcaneswithseat
There is a handle, a pole, one or more feet (toe cap), a seat that is usually folded on the handle or pole, without forearm support Support, a device that provides support during walking, see Figure 1. [Source: GB/T 16432-2016,120318]
3.2 Handle set handgrip
The part used to hold the cane in use is shown in Figure 1 in 1.
3.3 Handle cover width handgripbreadth
For the horizontal dimension at the largest section within the length of the handle, see Figure 2.
3.4 Lockingdevice
When the cane with a seat is folded, the device for locking the seat is shown in Figure 1, No. 3.
3.5 Limiter limitingdevice
When the cane with a seat is opened, the device restricts the seat to be horizontal, as shown in 4 in Figure 1.
3.5 Foot tip
The parts that contact the ground when the cane with a seat are in use are shown in Figure 1 in 6.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 19545.5-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10357.2-2013 — Test of mechanical properties of furniture - Part 2: Stability of chairs and stools
GB/T 10357.3-2013 — Test of mechanical properties of furniture -- Part 3: Strength and durability of chairs and stools
QB/T 4458-2013 — Folding chair
Secure payment via Stripe
Payments accepted
GB/T 19545.5-2021
$210.00