GB/T 18726-2011Software interface specification of integrated technology of modern design engineering (English PDF)
现代设计工程集成技术的软件接口规范
This is a limited preview
Buy now to download the full PDF (41 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18726-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
May 1, 2012
Scope
GB/T 18726-2011 is the English-translated version of 现代设计工程集成技术的软件接口规范.
GB/T 18726-2011 is the Chinese standard "Software interface specification of integrated technology of modern design engineering". Its scope clause reads: This standard specifies the open exchange of information and provide intermediate interface technology and technology information system (TIS) associated with different software systems.
These software systems can be divided into the following categories. PDM, CAD, CAPP, etc; intermediate open interfaces can be used to support the work and Modern Design Many other process-related software systems, such as CAE, CAM, also supports such as ERP and other management information systems.
This standard applies to guide enterprises in the implementation of information technology integration process, dynamic interface defined in the purchase of different software or related software As it may determine the degree of integration of reference. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 18726-2011
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- J 07
- Replacing
- GB/T 18726-2002
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 software Integration Interface Description
- 6 compliance determination
- Appendix A (informative) Product Data Browser Interface Example
- Annex B (informative) design data browser interface instance
- Annex C (informative) Product data extraction interface instance
- Annex D (informative) Examples of products BOM Extract Interface
- Annex E (informative) design data extraction interface instance
- Annex F (informative) Product data modification interface instance
- Appendix G (Informative Appendix) CAD system open interface Example
- Appendix H (Informative Appendix) CAD drawing management information extraction interface instance
- Annex I (Information Appendix) CAD graphics data conversion interface Example
- Appendix J (informative) computer-aided process planning software, open interfaces Example
- References
1 Scope
This standard specifies the open exchange of information and provide intermediate interface technology and technology information system (TIS) associated with different software systems.
These software systems can be divided into the following categories. PDM, CAD, CAPP, etc; intermediate open interfaces can be used to support the work and Modern Design
Many other process-related software systems, such as CAE, CAM, also supports such as ERP and other management information systems.
This standard applies to guide enterprises in the implementation of information technology integration process, dynamic interface defined in the purchase of different software or related software
As it may determine the degree of integration of reference.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17304-2009 CAD General technical specifications.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Technical Information System TechniqueInformationSystem; TIS
Technical information is mainly describe enterprise product design phase arising out of the relevant product definition, design, process design and other related letter interest. Such as product design data (drawings, calculations, design specifications, etc.), engineering analysis data, process data, process design data. tube
Information technology management software system is called technology information system.
3.2 Product Data Management ProductDataManagement; PDM
Manage all product-related data (including engineering specifications, electronic documents, images, CAD/CAPP/CAM files, product structure,
Product orders, supply conditions, etc.) and processes (including workflow, approval/issuance process, engineering change orders, etc.) technology. It provides a whole product
Data lifecycle management, and we can establish a parallel of collaborative product development environment for the design and manufacture enterprise-wide.
3.3 Computer Aided Design Computer-AidedDesign; CAD
The use of computer processing speed mass storage and graphics capabilities to assist in product design and technology, the English abbreviation CAD. Generalized
He said, CAD refers to the design and analysis of all of the Computer Aided.
3.4 CAPP Computer-AidedProcessPlanning; CAPP
Using a computer to develop parts of the machining process, the blank processed into engineering drawings of parts required, this process
Called Computer Aided Process Planning. It is to be processed by the computer input part geometry (shape, size, etc.) and process information (Materials, heat treatment, volume, etc.), by the process route and process the contents of computer parts and other technology to automatically output a file process.
3.5 Computer Aided Manufacturing Computer-AidedManufacturing; CAM
The use of computer processing speed and large-capacity storage ancillary products manufacturing technology, the abbreviation CAM. Generalized […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.
Similar standards
Editions of GB/T 18726
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 18726-2011 | Software interface specification of integrated technology of modern design engineering | current edition | Current |
| GB/T 18726-2002 | Software interface specification of integrated technology of modern design engineering | previous edition | Superseded |
This page sells the current edition, GB/T 18726-2011. Earlier editions are listed for reference only.
How to Download GB/T 18726-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 18726-2011
$650.00