Valid

GB/T 18501.8108-2026Connectors for electrical and electronic equipment - Product requirements - Part 8-108: Power connectors - Detail specification for 2P 250 A,1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated (English PDF)

电子和电气设备用连接器 产品要求 第8-108部分:电源连接器 2芯250 A、1000 V功率加2芯5 A、50 V信号插合锁紧时IP65/IP68防护等级未插合时IPXXB防护等级矩形外壳屏蔽连接器详细规范

Preview PDF

Also coversGB/T18501.8108-2026 + GBT18501.8108-2026

This is a limited preview

Buy now to download the full PDF (33 pages)

Need quotation for your management?

Get a formal quotation for GB/T 18501.8108-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 28, 2026

Implementation date

March 1, 2027

Scope

GB/T 18501.8108-2026 is the English-translated version of 电子和电气设备用连接器 产品要求 第8-108部分:电源连接器 2芯250 A、1000 V功率加2芯5 A、50 V信号插合锁紧时IP65/IP68防护等级未插合时IPXXB防护等级矩形外壳屏蔽连接器详细规范.

Power connectors for demanding environments are defined here through a detail specification within the series on connectors for electrical and electronic equipment. This part, 8-108, describes a rectangular-housing shielded connector that combines two power contacts with two signal contacts. According to its title, it is rated for 250 A at 1 000 V on the power side and 5 A at 50 V on the signal side, and it addresses protection against ingress both when mated and locked and when unmated.

Connector manufacturers will use it to design and qualify matching products, while equipment makers, for instance in high-voltage battery, charging and power distribution systems, can use it to specify interchangeable parts. Test laboratories and procurement engineers may refer to it when verifying that supplied connectors fit the described product type. It is a recommended national standard that adopts an international standard. It was issued on 28 August 2026 and takes effect on 1 March 2027.

Found what you need?

Document preview — GB/T 18501.8108-2026

National Standard of the People's Republic of China

ICS
31.220.10
Classification
L23

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

Foreword

GB/T 18501.8108-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 28 August 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 March 2027.

The document adopts an international standard (ISO or IEC).

It is under the responsibility of the Ministry of Industry and Information Technology (Electronics).

Classification: ICS 31.220.10; CCS L23.

1 Scope

Power connectors for demanding environments are defined here through a detail specification within the series on connectors for electrical and electronic equipment. This part, 8-108, describes a rectangular-housing shielded connector that combines two power contacts with two signal contacts. According to its title, it is rated for 250 A at 1 000 V on the power side and 5 A at 50 V on the signal side, and it addresses protection against ingress both when mated and locked and when unmated.

Connector manufacturers will use it to design and qualify matching products, while equipment makers, for instance in high-voltage battery, charging and power distribution systems, can use it to specify interchangeable parts. Test laboratories and procurement engineers may refer to it when verifying that supplied connectors fit the described product type. It is a recommended national standard that adopts an international standard. It was issued on 28 August 2026 and takes effect on 1 March 2027.

Remaining clauses in the full document

  • 2 Normative references
  • 3 Terms and definitions

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.

Similar standards

How to Download GB/T 18501.8108-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
33 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18501.8108-2026

$500.00