GB/T 18501.8106-2026Connectors for electronic and electrical equipment - Product requirements - Part 8-106: Power connectors - Detail specification for 2-way rectangular push-pull quick-locking fused connectors with rated current of 16A and rated voltage of 400V DC (English PDF)
电子和电气设备用连接器 产品要求 第8-106部分:电源连接器 2芯额定电流16A、额定电压直流400V的推拉快锁带保险丝的矩形连接器详细规范
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 18501.8106-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
January 1, 2027
Scope
GB/T 18501.8106-2026 is the English-translated version of 电子和电气设备用连接器 产品要求 第8-106部分:电源连接器 2芯额定电流16A、额定电压直流400V的推拉快锁带保险丝的矩形连接器详细规范.
GB/T 18501.8106-2026 is the Chinese national standard "Connectors for electronic and electrical equipment - Product requirements - Part 8-106: Power connectors - Detail specification for 2-way rectangular push-pull quick-locking fused connectors with rated current of 16A and rated voltage of 400V DC".
It was issued on September 28, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on January 1, 2027. It is a current standard.
Found what you need?
Document preview — GB/T 18501.8106-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 18501.8106-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 28 September 2026.
It is one of 10 parts of the GB/T 18501 series.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 18501.8106-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 18501.1-2001 — Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 1: Generic specification
GB/T 18501.2-2001 — Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 2: Circular connectors with assessed quality -- Sectional specification
GB/T 18501.8100-2025 — Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
GB/T 18501.8101-2025 — Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
GB/T 18501.8102-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
GB/T 18501.8105-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-105: Power connectors - Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for 63A rated current and 400V rated voltage
GB/T 18501.8107-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when
GB/T 18501.8108-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-108: Power connectors - Detail specification for 2P 250 A,1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated
GB/T 18501.8109-2026 — Connectors for electrical and electronic equipment—Product requirements—Part 8-109: Power connectors—Detail specification for 2P 130 A, 1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
How to Download GB/T 18501.8106-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 18501.8107-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when
GB/T 18501.8105-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-105: Power connectors - Detail specification for 2-pole snap locking rectangular power connectors with plastic housing for 63A rated current and 400V rated voltage
GB/T 18501.8108-2026 — Connectors for electrical and electronic equipment - Product requirements - Part 8-108: Power connectors - Detail specification for 2P 250 A,1 000 V power plus 2P 5 A, 50 V signal rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated
GB/T 18501.8106-2026
$255.00