Valid

GB/T 17780.6-2012Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery (English PDF)

纺织机械安全要求第6部分：织造机械

Preview PDF

This is a limited preview

Buy now to download the full PDF (37 pages)

Need quotation for your management?

Get a formal quotation for GB/T 17780.6-2012 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Level / Type

National · Recommended

Issue date

November 6, 2012

Implementation date

June 1, 2013

Scope

GB/T 17780.6-2012 is the English-translated version of 纺织机械安全要求第6部分：织造机械.

GB/T 17780.6-2012 is the Chinese standard "Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery". Its scope clause reads: GB/T 17780 provisions of this part of the major risk weaving machinery and related safety requirements and/or measures.

This section applies to weaving, all machines, equipment and related devices used knitting and tufting. This part of GB/T 17780.1 combination. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 17780.6-2012

National Standard of the People's Republic of China

ICS: 59.120
Classification: W 90
Replacing: GB/T 17780-1999

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 major risk glance
5 major risk and the corresponding safety requirements and/or measures
5.1 Overview
5.2 Loom
5.2.1 General requirements loom
5.2.2 shuttle loom
5.2.3 rapier
5.2.4 pile head wire loom (Wilton loom, loom Aipangeli ribbed silk, velvet machine)
5.2.5 Gripper Loom
5.2.6 double pile loom (velvet loom, heavy fabric or carpet weaving loom)
5.2.7 Water Jet Loom
5.2.8 Needle Loom
5.2.9 Jacquard
5.3 knitting machine (circular knitting machines, knitting machines and warp knitting machines)
5.3.2 circular knitting machine
5.3.3 knitting machine
5.3.4 warp knitting machine (including the stitching machine) and Raschel machines
5.4 tufting machine
5.5 weaving creel
6 safety inspection requirements and/or measures
7 related to the use of the machine
References

1 Scope

GB/T 17780 provisions of this part of the major risk weaving machinery and related safety requirements and/or measures.

This section applies to weaving, all machines, equipment and related devices used knitting and tufting.

This part of GB/T 17780.1 combination.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the edition before apply to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 7111.1 Textile machinery - Noise test code - Part 1. General requirements (GB/T 7111.1-2002, eqv

ISO 9902-1.2001)

GB/T 7111.6 Textile machinery - Noise test code - Part 6. Weaving Machinery (GB/T 7111.6-2002, eqv

ISO 9902-6.2001)

GB 16754-2008 Safety of machinery - Emergency stop design principles (ISO 13850.2006, IDT)

GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design (ISO 13849-1.

2006, IDT)

GB/T 17454.2 - Part 2 Safety of machinery - Pressure sensitive protective devices. pressure sensitive edges and pressure sensitive bars design and testing General (GB/T 17454.2-2008, ISO 13856-2.2005, IDT)

GB/T 17780.1-2012 Textile machinery - Safety requirements - Part 1. General requirements (ISO 11111-1.2005, MOD)

GB 17888.1 Safety of machinery stationary facilities - Part 1. Choice of fixed means of access between two planes (GB 17888.1-2008, ISO 14122-1.2001, IDT)

GB 17888.2 Safety of machinery stationary facilities - Part 2. Working platforms and gangways (GB 17888.2-2008,

ISO 14122-2.2001, IDT)

GB 17888.3 Safety of machinery stationary facilities - Part 3. Stairs, steps and guardrails (GB 17888.3-

2008, ISO 14122-3.2001, IDT)

GB 17888.4 Safety of machinery stationary facilities - Part 4. Fixed ladders (GB 17888.4-2008,

ISO 14122-4.2001, IDT)

GB/T 19436.1-2004 electric machinery electrical safety sensitive protective equipment - Part 1. General requirements and tests (IEC 61496-

1.1997, IDT)

GB/T 19436.2-2004 Safety of machinery - Electrical power sensitive protective equipment - Part 2. using active optoelectronic protective devices (AOP-

Ds) Special equipment requirements (IEC 61496-2.1997, IDT)

GB 23821-2009 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs (ISO 13857.2008, IDT)

3 Terms and Definitions

GB/T 17780.1 defined and the following terms and definitions apply to this document.

FZ/T 93048.1 | FZ/T 93019 | GB/T 17780.4 | GB/T 17780.3 | GB/T 17780.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 9902 · GB 16754-2008 · ISO 13850.2006 · ISO 13849 · ISO 13856 · ISO 11111 · GB 17888.1 · GB 17888.1-2008 · ISO 14122 · GB 17888.2 · GB 17888.2-2008 · GB 17888.3 · GB 17888.4 · GB 17888.4-2008 · IEC 61496 · GB 23821-2009 · ISO 13857.2008

Cited by

How to Download GB/T 17780.6-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.