Valid

GB/T 17780.2-2012Textile machinery -- Safety requirements -- Part 2: Spinning preparatory and spinning machines (English PDF)

纺织机械安全要求第2部分：纺纱准备和纺纱机械

Preview PDF

This is a limited preview

Buy now to download the full PDF (47 pages)

Need quotation for your management?

Get a formal quotation for GB/T 17780.2-2012 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Level / Type

National · Recommended

Issue date

November 5, 2012

Implementation date

June 1, 2013

Scope

GB/T 17780.2-2012 is the English-translated version of 纺织机械安全要求第2部分：纺纱准备和纺纱机械.

GB/T 17780.2-2012 is the Chinese standard "Textile machinery -- Safety requirements -- Part 2: Spinning preparatory and spinning machines". Its scope clause reads: GB/T 17780 provisions of this part of the major risk spinning preparatory and spinning machinery and corresponding safety requirements and/or measures.

This section applies to opening, cleaning, blending, scouring, packaging, carding, tow cutting and stretch-breaking spinning, spinning preparation process after carding Road And all the machinery, equipment and related equipment for use in spinning. This section should be used in conjunction with the GB/T 17780.1.

Found what you need?

Document preview — GB/T 17780.2-2012

National Standard of the People's Republic of China

ICS: 59.120.10
Classification: W 90
Replacing: GB/T 17780-1999

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 major risk glance
5 major risk of common safety requirements and/or measures
5.1 General
5.2 opening, cleaning, mixing machine
5.2.1 General requirements
5.2.2 Automatic blending opener
5.2.3 opener (opener machine impurity)
5.2.4 opener for cotton and cotton tank
5.2.5 Mobile hopper emptying means
5.2.6 Empty the hopper
7 5.4 balers
9 Card 5.
5.5.1 General requirements
5.5.2 flat card
5.5.3 Rolla, cashmere roll carding machine
5.5.4 rubbing machine
5.6 tow cutting and stretch-breaking spinning
5.7 combing preparation process, after spinning
5.7.1 General requirements
5.7.2 staple drawframe
5.7.3 gill, including the "crossbar" and "chain-type"
5.7.4 Complex washing machine
5.7.5 and winder and reeler, bars and winding machine
5.7.6 Cotton Comber
5.7.7 straight Comber (for worsted yarn, flax yarn and the like yarn)
5.7.8 roving machine
5.7.9 apron-style roving machine
5.7.10 automatic changer
5.8.1 General requirements
5.8.2 19 ring spinning machine
5.8.3 open-end spinning machine
5.8.4 spinning needle in row
6 safety inspection requirements and/or measures
7 illustrate the use of the machine
References

1 Scope

GB/T 17780 provisions of this part of the major risk spinning preparatory and spinning machinery and corresponding safety requirements and/or measures.

This section applies to opening, cleaning, blending, scouring, packaging, carding, tow cutting and stretch-breaking spinning, spinning preparation process after carding Road

And all the machinery, equipment and related equipment for use in spinning.

This section should be used in conjunction with the GB/T 17780.1.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 7111.1 Textile machinery - Noise test code - Part 1. General requirements (GB/T 7111.1-2002, eqv ISO 9902-

1.2001)

GB/T 7111.2 Textile machinery - Noise test code - Part 2. spinning preparatory and spinning machinery (GB/T 7111.2-2002, eqv ISO 9902-2.2001)

GB 12265.3-1997 Safety of machinery to avoid crushing of parts of the human body minimum spacing [eqvEN349.1993 (ISO /

DIS13854)]

GB/T 15706.1-2007 Safety of machinery - Basic concepts, general principles for design - Part 1. Basic terminology, methodology (ISO 12100-

1.2003, IDT)

GB/T 15706.2-2007 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles (ISO 12100-2.

2003, IDT)

GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design (ISO 13849-1.

2006, IDT)

GB/T 17454.1 - Part 1 Safety of machinery - Pressure sensitive protective devices. pressure sensitive mats and pressure sensitive floors of design and testing General (GB/T 17454.1-2008, ISO 13856-1.2001, IDT)

GB/T 17454.2 - Part 2 Safety of machinery - Pressure sensitive protective devices. pressure sensitive edges and pressure sensitive bars design and testing General (GB/T 17454.2-2008, ISO 13856-2.2005, IDT)

GB/T 17454.3 - Part 3 Safety of machinery - Pressure sensitive protective devices. pressure-sensitive buffer, a pressure-sensitive plate, the pressure-sensitive lines, and similar means

Set Design and Test General (GB/T 17454.3-2008, ISO 13856-3.2006, IDT)

GB/T 17780.1-2012 Textile machinery - Safety requirements - Part 1. General requirements (ISO 11111-1.2005, MOD)

Interlock design GB/T 18831-2010 mechanical belt guard and selection principles (ISO 14119.1998 and

Amd.1.2007, MOD)

GB 23821-2009 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs (ISO 13857.2008, IDT)

EN795 prevent high Falling fixture requirements and tests (Protectionagainstfalsfromaheight-Anchor devices-Requirementsandtesting)

FZ/T 93048.1 | FZ/T 93019 | GB/T 17780.5 | GB/T 17780.4 | GB/T 17780.3 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 9902 · GB 12265.3-1997 · GB/T 15706.1-2007 · ISO 12100 · ISO 13849 · ISO 13856 · ISO 11111 · ISO 14119.1998 · GB 23821-2009 · ISO 13857.2008

Cited by

How to Download GB/T 17780.2-2012

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.