GB/T 17737.305-2026Coaxial communication cables—Part 1-305: Mechanical test methods—Solderability and resistance to soldering (English PDF)
同轴通信电缆 第1-305部分:机械试验方法 可焊性和耐焊接热
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 17737.305-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
May 1, 2027
Scope
GB/T 17737.305-2026 is the English-translated version of 同轴通信电缆 第1-305部分:机械试验方法 可焊性和耐焊接热.
GB/T 17737.305-2026 is the Chinese national standard "Coaxial communication cables—Part 1-305: Mechanical test methods—Solderability and resistance to soldering".
It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard.
Found what you need?
Document preview — GB/T 17737.305-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 17737.305-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.
It is one of 51 parts of the GB/T 17737 series.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 17737.305-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 17737.1-1999 — Radio-frequency cables. Part 1: Generic specification. Section 1: Definitions and requirements
GB/T 17737.1-2000 — RF cables - Part 1: Generic specification - General, definitions, requirements and test methods
GB/T 17737.1-2013 — Coaxial communication cables -- Part 1: Generic specification -- General, definitions and requirements
GB/T 17737.2-2000 — Radio-frequency cables. Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
GB/T 17737.3-2001 — Radio frequency cables -- Part 3: Sectional specification for coaxial cables for local area networks
GB/T 17737.4-2013 — Coaxial communication cables - Part 4: Sectional specification for leaky cables
GB/T 17737.4-2025 — Coaxial communication cables - Part 4: Sectional specification for leaky cables
GB/T 17737.5-2013 — Coaxial communication cables -- Part 5: Sectional specification for CATV trunk and distribution cables
GB/T 17737.8-2022 — Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
GB/T 17737.9-2024 — Coaxial communication cables - Part 9: Sectional specification for flexible RF coaxial cables
GB/T 17737.10-2024 — Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with fluoropolymer dielectric
GB/T 17737.11-2024 — Coaxial communication cables - Part 11: Sectional specification for semi-rigid cables with polyethylene(PE) dielectric
GB/T 17737.100-2018 — Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
GB/T 17737.101-2018 — Coaxial communication cables -- Part 1-101: Electrical test methods -- Test for conductor d.c. resistance of cable
GB/T 17737.102-2018 — Coaxial communication cables -- Part 1-102: Electrical test methods -- Test for insulation resistance of cable dielectric
GB/T 17737.103-2018 — Coaxial communication cables -- Part 1-103: Electrical test methods -- Test for capacitance of cable
GB/T 17737.104-2018 — Coaxial communication cables -- Part 1-104: Electrical test methods -- Test for capacitance stability of cable
GB/T 17737.105-2018 — Coaxial communication cables -- Part 1-105: Electrical test methods -- Test for withstand voltage of cable dielectric
GB/T 17737.106-2018 — Coaxial communication cables -- Part 1-106: Electrical test methods -- Test for withstand voltage of cable sheath
GB/T 17737.107-2018 — Coaxial communication cables -- Part 1-107: Electrical test methods -- Test for cable microphone charge level (mechanically induced noise)
GB/T 17737.108-2018 — Coaxial communication cables -- Part 1-108: Electrical test methods -- Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
GB/T 17737.110-2026 — Coaxial communication cables - Part 1-110: Electrical test methods - Test for continuity
GB/T 17737.112-2018 — Coaxial communication cables -- Part 1-112: Electrical test methods -- Test for return loss (uniformity of impedance)
GB/T 17737.113-2024 — Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant
GB/T 17737.115-2018 — Coaxial communication cables -- Part 1-115: Electrical test methods -- Test for regularity of impedance (pulse/step function return loss)
GB/T 17737.116-2026 — Coaxial communication cables - Part 1-116: Electrical test methods - Test for impedance with time domain reflectometry (TDR)
GB/T 17737.119-2024 — Coaxial communication cables - Part 1-119: Electrical test methods - RF power for coaxial cables and cable assemblies
GB/T 17737.122-2018 — Coaxial communication cables -- Part 1-122: Electrical test methods -- Test for crosstalk between coaxial cables
GB/T 17737.123-2026 — Coaxial communication cables-Part 1-123:Electrical test methods-Test for attenuation constant of radiating cable
GB/T 17737.124-2026 — Coaxial communication cables-Part 1-124:Electrical test methods-Test for coupling loss of radiating cable
GB/T 17737.125-2026 — Coaxial communication cables-Part 1-125:Electrical test methods-Test for equivalent relative permittivity and equivalent dissipation factor of dielectric
GB/T 17737.126-2026 — Coaxial communication cables - Part 1-126: Electrical test methods - Corona extinction voltage
GB/T 17737.200-2018 — Coaxial communication cables -- Part 1-200: Environmental test methods -- General requirements
GB/T 17737.201-2015 — Coaxial communication cables -- Part 1-201: Environmental test methods -- Test for cold bend performance of cable
GB/T 17737.203-2018 — Coaxial communication cables -- Part 1-203: Environmental test methods -- Test for water penetration of cable
GB/T 17737.205-2018 — Coaxial communication cables -- Part 1-205: Environmental test methods -- Resistance to solvents and contaminating fluids
GB/T 17737.209-2026 — Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling
GB/T 17737.215-2026 — Coaxial communication cables - Part 1-215: Environmental test methods - High temperature ageing of cables
GB/T 17737.301-2018 — Coaxial communication cables -- Part 1-301: Mechanical test methods -- Test for ovality
GB/T 17737.302-2018 — Coaxial communication cables -- Part 1-302: Mechanical test methods -- Test for eccentricity
GB/T 17737.308-2018 — Coaxial communication cables -- Part 1-308: Mechanical test methods -- Test for tensile strength and elongation for copper-clad metals
GB/T 17737.310-2018 — Coaxial communication cables -- Part 1-310: Mechanical test methods -- Test for torsion characteristics of copper-clad metals
GB/T 17737.313-2015 — Coaxial communication cables -- Part 1-313: Mechanical test methods -- Adhesion of dielectric and sheath
GB/T 17737.314-2018 — Coaxial communication cables -- Part 1-314: Mechanical test methods -- Test for cable bending
GB/T 17737.316-2018 — Coaxial communication cables -- Part 1-316: Mechanical test methods -- Test for maximum pulling force of cable
GB/T 17737.317-2018 — Coaxial communication cables -- Part 1-317: Mechanical test methods -- Test for crush resistance of cable
GB/T 17737.318-2018 — Coaxial communication cables -- Part 1-318: Mechanical test methods -- Heat performance tests
GB/T 17737.324-2018 — Coaxial communication cables -- Part 1-324: Mechanical test methods -- Test for abrasion resistance of cable
GB/T 17737.325-2018 — Coaxial communication cables -- Part 1-325: Mechanical test methods -- Aeolian vibration
GB/T 17737.801-2022 — Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene(PTFE) dielectric
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
How to Download GB/T 17737.305-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17737.308-2018 — Coaxial communication cables -- Part 1-308: Mechanical test methods -- Test for tensile strength and elongation for copper-clad metals
GB/T 17737.302-2018 — Coaxial communication cables -- Part 1-302: Mechanical test methods -- Test for eccentricity
GB/T 17737.310-2018 — Coaxial communication cables -- Part 1-310: Mechanical test methods -- Test for torsion characteristics of copper-clad metals
GB/T 17737.305-2026
$255.00