GB/T 17737.302-2018Coaxial communication cables -- Part 1-302: Mechanical test methods -- Test for eccentricity (English PDF)

Foreword

GB/T 17737 "Coax Cable" has been or is planned to release the following parts.

--- Part 1. General rules, definitions and requirements;

--- Part 1-301. Mechanical test method ellipticity test;

--- Part 1-302. Mechanical test method eccentricity test;

---Part 1-304. Mechanical test method impact test;

--- Part 1-308. Mechanical test methods - Tests for tensile strength and elongation of copper-clad metal;

--- Part 1-310. Mechanical test method Test for torsional characteristics of copper-clad metal;

--- Part 1-313. Mechanical test method Adhesion of medium and sheath;

--- Part 1-314. Mechanical test method cable bending test;

--- Part 1-316. Mechanical test method for maximum tensile test of cables;

--- Part 1-317. Mechanical test method cable compression test;

--- Part 1-318. Mechanical test method thermal performance test;

--- Part 1-324. Mechanical test method cable wear resistance test;

--- Part 1-325. Mechanical test method for wind-induced vibration test;

This part is part 1-302 of GB/T 17737.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part uses the translation method equivalent to IEC 61196-1-302.2005 "coaxial communication cable part 1-302. mechanical test method

Eccentricity test.

The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.

Coaxial communication cables - Part 1 . General rules, definitions and requirements (IEC 61196-1.

2005, IDT).

1 Scope

This part of GB/T 17737 applies to coaxial communication cables. It specifies the medium, outer conductor or sheath for determining the coaxial communication cable

Test method for eccentricity.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

IEC 61196-1 coaxial communication cables - Part 1. General specification, definitions and requirements (Coaxialcommunicationca-

bles-Part 1. Genericspecification-General, definitionsandrequirements)

3 Terms and definitions

The terms and definitions defined in IEC 61196-1 apply to this document.

4 eccentricity test