GB/T 17737.310-2018Coaxial communication cables -- Part 1-310: Mechanical test methods -- Test for torsion characteristics of copper-clad metals (English PDF)

Foreword

GB/T 17737 "Coaxial Communication Cable" has or plans to issue the following parts.

--- Part 1. General rules, definitions and requirements;

--- Section 1-31 . Mechanical test methods ; Ellipticity test ;

-- Part 1-302 . Mechanical test methods ; eccentricity test ;

-- Part 1-304 . Mechanical test methods ; Impact test ;

Part 1-108 . Mechanical test methods -- Tensile strength and elongation test of copper clad metal ;

--- Part 1-310. Mechanical test methods Torsional characteristics of copper clad metal;

--- Part 1-313. Mechanical test methods Adhesion of media and sheath;

--- Part 1-314. Mechanical test methods Bending test of cables;

--- Part 1-316. Mechanical test methods Maximum tensile strength test of cables;

--- Part 1-317. Mechanical test methods Cable compression test;

--- Sections 1-318. Mechanical test methods Thermal performance test;

--- Part 1-324 . Mechanical test methods Cable abrasion resistance test ;

--- Part 1-325 . Mechanical test methods Wind - induced vibration test ;

This part is part 1-310 of GB/T 17737.

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

This section uses the translation method equivalent to the use of IEC 61196-1-310.2005 "coaxial communication cable part 1-310. mechanical test methods

Copper Clad Metal Torsional Characteristics Test."

1 Scope

This part of GB/T 17737 applies to coaxial communication cables. It specifies the test for determining the torsional characteristics of the copper-clad metal of a coaxial cable.

method.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 17737.1-2013 Coaxial telecommunication cable Part 1. General specifications General, definitions and requirements (IEC 61196-1.2005,

IDT)

3 Terms and definitions

The terms and definitions defined in GB/T 17737.1-2013 apply to this document.

4 Torsion test