Valid

GB/T 17737.200-2018Coaxial communication cables -- Part 1-200: Environmental test methods -- General requirements (English PDF)

同轴通信电缆第1-200部分：环境试验方法通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for GB/T 17737.200-2018 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

March 15, 2018

Implementation date

October 1, 2018

Scope

GB/T 17737.200-2018 is the English-translated version of 同轴通信电缆第1-200部分：环境试验方法通用要求.

GB/T 17737.200-2018 — This part of GB/T 17737 gives the general requirements and conditions for environmental testing of coaxial communication cables. This part applies to GB/T 17737.2XX series of standards, this series of standards specifies the environmental test methods for coaxial communication cables.

Test details (eg, temperature, duration) and/or test requirements will be given in the relevant cable standards.

Found what you need?

Document preview — GB/T 17737.200-2018

National Standard of the People's Republic of China

ICS: 33.120.10
Classification: L 26

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 samples
4.1 Tested cable (CUT)
4.2 Pretreatment
5 Test
6 test conditions
6.1 Environmental conditions

Foreword

GB/T 17737 "Coaxial Communication Cable" has or plans to issue the following parts.

--- Part 1. General rules, definitions and requirements;

--- Section 1-200. General requirements for environmental test methods;

--- Part 1-201. Environmental test methods Cold bending test of cables;

--- Part 1-202 . Environmental test methods resistance to environmental stress cracking ;

--- Part 1-203 . Environmental test methods Water seepage test for electrical cables ;

--- Part 1-205. Environmental test methods Solvent resistance and contamination test;

--- Part 1-206 . Environmental test methods ; Climate sequence ;

--- Part 1-208 . Environmental test methods Longitudinal pressure resistance ;

--- Section 1-209. Environmental Test Methods Thermal Cycle;

This part is Part 1-200 of GB/T 17737.

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

This section uses the translation method equivalent to the use of IEC 61196-1-200.2014 "coaxial communication cable Part 1-200. environmental test methods

common enquiries".

The Chinese documents that have a consistent correspondence with the normatively quoted international documents in this section are as follows.

---GB/T 17737.1-2013 Coaxial telecommunication cables Part 1. General specifications General, definitions and requirements (IEC 61196-1.

2005, IDT)

1 Scope

This part of GB/T 17737 gives the general requirements and conditions for environmental testing of coaxial communication cables. This part applies to

GB/T 17737.2XX series of standards, this series of standards specifies the environmental test methods for coaxial communication cables.

Test details (eg, temperature, duration) and/or test requirements will be given in the relevant cable standards.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

IEC 61196-1 Coaxial communication cable Part 1. General specification General rules, definitions and requirements (Coaxialcommunication

cables-Part 1.Generic specification-General,definitionsandrequirements)

3 Terms and definitions

The terms and definitions defined by IEC 61196-1 apply to this document.

4 samples

4.1 Tested cable (CUT)

Unless otherwise specified in the relevant test methods, the length of the cable to be tested shall take into account the dynamic range of the measuring equipment and the specified frequency range.

To obtain the required measurement accuracy. Unless otherwise specified in the relevant cable specification, the measurement accuracy of the cable length shall be better than 1%.

4.2 Pretreatment

The cable under test shall be preconditioned at a constant ambient temperature for a period of time to stabilize the temperature of the sample within the temperature range specified in 6.1.

5 Test

The test and performance characteristics required for different sizes of cables are specified by the relevant cable specification.

6 test conditions

6.1 Environmental conditions

Unless otherwise specified, the test should be conducted in the following environment.

---Temperature. 15°C~35°C;

--- Relative humidity. 25%~75% (no condensation);

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 61196

How to Download GB/T 17737.200-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.