GB/T 17737.201-2015Coaxial communication cables -- Part 1-201: Environmental test methods -- Test for cold bend performance of cable (English PDF)

Foreword

GB/T 17737 "Coaxial communication cables" Environmental Test Methods section or plan to release the following sections.

--- Part 1-200. Environmental test methods - General requirements;

--- The first part 1-201. Environmental test methods for cold bending performance test cables;

--- Section 1-203. Environmental test methods for cables seepage test;

--- The first part 1-205. Environmental test methods and solvent contaminated fluid test;

--- Section Part 1-206. Environmental test methods for cables climatic sequence of tests;

--- Section 1-208. Environmental test methods for cables longitudinal pressure test.

This section GB/T Part of 1-20117737.

This section drafted in accordance with GB/T 1.1-2009 given rules.

2009 "Coaxial communication cables - Part 1-201.. Environmental test methods in this section use the translation method using equivalent IEC 61196-1-201 Cold bending properties of the cable test. " this part made the following editorial changes.

--- In Chapter 1, "scope" in "CATV and telecom cables" to "communication cable";

--- In Chapter 2, "Normative references" removed "IEC 60050-726" number of years;

--- Increase the standard's reference number (see Chapter 3, 4.4,5.1,5.3,6.1,6.4);

--- Increasing the "PE" and "PVC" the Chinese name (see 4.4,6.4);

--- Revised Figure 1 (see Figure 1).

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190).

This section drafted by. China Electronics Technology Group Corporation No. 23 Research Institute.

1 Scope

GB/T 17737 apply to this part of the communication cable, test method provides for coaxial communication cables forming performance.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-1:2007, IDT) GB/T 17737.1-2013 Coaxial communication cables - Part 1. Generic specification - General, definitions and requirements (IEC 61196-1:2005, IDT) IEC 60050-726 International Electrotechnical Vocabulary transmission lines and waveguides (Internationalelectrotechnicalvocabulary-Transmissionlinesandwaveguides)

3 Terms and Definitions

Terms and definitions IEC 60050-726 and GB/T 17737.1-2013 defined apply to this document.

4 A method for forming performance test ---