GB/T 17363.1-2009Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis (English PDF)
黄金制品金含量无损测定方法 第1部分:电子探针微分析法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 17363.1-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 19, 2009
Implementation date
December 1, 2009
Scope
GB/T 17363.1-2009 is the English-translated version of 黄金制品金含量无损测定方法 第1部分:电子探针微分析法.
GB/T 17363.1-2009 is the Chinese standard "Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis". Its scope clause reads: GB/T 17363 in this section specifies the method for the determination of gold content of the main elements of the article with an electron probe spectrometer.
This section applies to the determination of composition is relatively homogeneous gold products. Also applicable to the determination of thickness greater than 3µm gold or gold products Surface gold content.
This section does not apply to non-uniform composition or determination of gold content of the article as a whole gold plating. Its clauses include terms and definitions; fundamentals; apparatus and equipment.
Found what you need?
Document preview — GB/T 17363.1-2009
National Standard of the People's Republic of China
- ICS
- 71.040.99
- Classification
- N 53
- Replacing
- GB/T 17363-1998
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Fundamentals
- 5 Apparatus and Equipment
1 Scope
GB/T 17363 in this section specifies the method for the determination of gold content of the main elements of the article with an electron probe spectrometer.
This section applies to the determination of composition is relatively homogeneous gold products. Also applicable to the determination of thickness greater than 3µm gold or gold products
Surface gold content.
This section does not apply to non-uniform composition or determination of gold content of the article as a whole gold plating.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 4930 micro beam analysis electron probe microanalysis standard specimen technical conditions Guidelines
JJG901 electron microprobe analyzer national verification procedures
JJF1001-1998 common measurement terms and definitions
3 Terms and Definitions
JJF1001-1998 and the following terms and definitions apply to this section.
3.1 Surface gold content
Some products have a surface coating or cladding. Gold plating or cladding content called "surface gold content."
3.2 Simple substance
It made of a material elements called "elemental." Such as. gold, silver, copper and the like.
3.3 Quality Score
Mass of an element in the quality of the sample divided by the sample values obtained, expressed as a percentage.
4 Fundamentals
Without changing the electron probe micro-analyzer operation state conditions were measured electron excitation area measured gold articles and reference materials
Characteristic X-ray intensity emitted, and calculate the characteristic X-ray intensity ratio k related elements, then ZAF correction calculation, eligible
It was the mass fraction of gold and gold products in other major elements.
5 Apparatus and Equipment
5.1 Instrument
5.1.1 Electron microprobe analyzer
According JJG901 certified by.
5.1.2 vertical upright microscope
more than 300 times magnification.
5.2 Equipment
5.2.1 micro-polishing machine
polishing region millimeter.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 17363.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 17363.1-2009 | Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis | current edition | Current |
| GB/T 17363-1998 | Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis | previous edition | Superseded |
This page sells the current edition, GB/T 17363.1-2009. Earlier editions are listed for reference only.
How to Download GB/T 17363.1-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17363.2-2009 — Nondestructive mensuration of gold content in the gold products -- Part 2: Method of compositive determine
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 17363.1-2009
$125.00