GB/T 16991-2008Textiles -- Test for colour fastness -- Colour fastness and ageing to artificial light at high temperatures: Xenon arc (English PDF)
纺织品 色牢度试验 高温耐人造光色牢度及抗老化性能 氙弧
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for GB/T 16991-2008 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
August 6, 2008
Implementation date
June 1, 2009
Scope
GB/T 16991-2008 is the English-translated version of 纺织品 色牢度试验 高温耐人造光色牢度及抗老化性能 氙弧.
GB/T 16991-2008 — This standard specifies the method of determining the color of resistance to all types of textile artificial light instead of natural daylight as well as at the same time the role of the role of heat energy Force and methods of anti-aging ability.
In five different exposure conditions (see 6.1), 4 using a D65 light source, one kind of a shorter deadline Wavelength light source. This test method is particularly taking into account the textiles affected by light and heat generated inside the vehicle.
The five different exposure conditions can provide similar but not necessarily the same test results.
Found what you need?
Document preview — GB/T 16991-2008
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 04
- Replacing
- GB/T 16991-1997
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3.1 Color fastness test
- 3.2 Aging test
- 4 Equipment and Materials
- 4.1 Standard blue wool
Foreword
This standard uses the redrafted law revision using ISO 105-B06.1998 "Textiles Tests for color fastness high temperature resistant artificial light fastness and anti-aging properties. Xenon arc "and ISO 105-B06 amendments 1.2002. This standard and ISO 105-B06.1998 and ISO 105-B06 repair Change a single 1. The main change is the 2002 reference standard is replaced with ISO standards corresponding to our standards.
This standard replaces GB/T 16991-1997 "textile color fastness test high-temperature light fastness. Xenon arc." This standard GB/T 16991-1997 compared to the main changes are as follows.
--- Remove the 2 reference standard GB/T 8432-1987, GB/T 730-1986, adds a reference standard GB/T 8431.
--- Principle adds color fastness and aging test instrument rating.
--- The term "blue wool standards" to "blue wool standard."
--- Equipment and materials added to the blue wool standard description of the instrument and the light source and the optical device requirements; "Irradiance Monitor Meter "to" radiometer "; increase blackboard thermometer," Black standard thermometer "to" Black Label thermometer "; increased shading paper tracings Said; remove humidity control standards; increase when using the instrument rating, a description of the instrument; increasing material. polyester non-woven fabric, and describes Said its requirements.
--- Revised exposure cards and sample preparation (with respect to the GB/T 16991-1997 of "Sample 6"); to increase its backing and requirements Description; Amendment sample loading mode, reserved GB/T 16991-1997 in Figure 2 sample loading method described herein.
--- The GB/T 16991-1997 in "5 exposure test conditions" integrated into the "operating procedures"; and to delete the original Article 3 kinds of exposure Member, increasing five kinds of exposure conditions (conditions increased from 6 amendments 1.2002); revision of the original exposure method, an increase of one kind of exposure method.
--- Modify light fastness assessment; the corresponding rating under the new conditions of exposure and exposure method.
--- Modify the test report.
--- Increase in Appendix A, Appendix B, Appendix C and Appendix D.
The Standard Appendix A, Appendix B, Appendix C and Appendix D are normative appendix.
The standard proposed by China National Textile Council.
The standard by the China Textile Association, Institute of Standardization.
This standard was drafted. wool and linen, Shanghai Textile Research Institute of Science and Technology, Shanghai textile industry technical supervision, national textile quality system the amount of supervision and inspection center.
1 Scope
This standard specifies the method of determining the color of resistance to all types of textile artificial light instead of natural daylight as well as at the same time the role of the role of heat energy Force and methods of anti-aging ability. In five different exposure conditions (see 6.1), 4 using a D65 light source, one kind of a shorter deadline Wavelength light source. This test method is particularly taking into account the textiles affected by light and heat generated inside the vehicle.
The five different exposure conditions can provide similar but not necessarily the same test results.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 250 textile color fastness test assessing change in color like the gray card (GB/T 250-2008, ISO 105-A02.1993, IDT) GB/T 6151 Textiles Tests for color fastness test General (GB/T 6151-1997, eqv ISO 105-A01.1994) GB/T 8427 Textiles Tests for color fastness Colour fastness to artificial light. Xenon arc (GB/T 8427-2008, ISO 105-B02.1994, MOD) GB/T 8431 Textiles Tests for color fastness of the photochromic test and evaluation (GB/T 8431-1998, eqv ISO 105-B05.1993) FZ/T 01024 discoloration degree of sample instrument evaluation method (FZ/T 01024-1993, neq ISO 105-A05.1992) Principle 3
3.1 Color fastness test
The sample with the blue wool standards under specified conditions were placed under artificial light exposure, after being quantitative light energy, through Blue wool sample and standard samples or GB/T 250 specified by assessing change in color is compared with the gray sample card, or by FZ/T 01024 referred Given color detection equipment was evaluated to assess the extent of its light color.
3.2 Aging test
Specimens should be 6 blue wool standard (see GB/T 8427) together, under specified conditions, were placed under artificial light exposure. The test Like with the GB/T 250 specified assessing change in color like the gray card to rate their degree of light color, or use FZ/T 01024 stipulated the color of their light fastness test instrument to rate the degree of discoloration. Another characteristic of aging, such as physical properties, etc., can also be evaluated.
Note. The principle should be strictly in accordance with the requirements of the test, and according to GB/T 6151 test results rating.
4 Equipment and Materials
4.1 Standard blue wool
2 may use different sets of blue wool standards, the two are not interchangeable.
4.1.1 1-8 Blue Wool Standards Blue wool standard used in Europe like digital 1-8, respectively, of the eight kinds of wool standards within the group is named. The Blue Sheep Mao standard is dyed wool Table 1 listed composition. In level 1-8, after each digit represents blue Wool color fastness standards in light color is about 2 times the previous one (see Table 1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 250Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
- GB/T 250-2008Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
- GB/T 6151Textiles -- Tests for colour fastness -- General principles of testing
- GB/T 6151-1997Textiles -- Tests for colour fastness -- General principles of testing
- GB/T 8427Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc
- GB/T 8427-2008Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc
ISO 105
Cited by
- QC/T 1016-2022Door trim panel assemblies for passenger cars
- QC/T 804-2022Instrument panel assembly and console assembly for passenger cars
- GB/T 39375-2020Leather - Physical and mechanical tests - Determination of dimensional change
- QC/T 236-2019Test methods for properties of automotive interior materials
- GB/T 35751-2017Nonwovens and composite nonwovens for automotive interior
- GB/T 33389-2016Woven fabrics and woven composite fabrics for automotive interior
How to Download GB/T 16991-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 250-2008 — Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
GB/T 25000.1-2021 — Systems and software engineering - Systems and software quality requirements and evaluation(SQuaRE) - Part 1: Guide to SQuaRE
GB/T 25000.10-2016 — Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Part 10: System and software quality models
Secure payment via Stripe
Payments accepted
GB/T 16991-2008
$225.00