GB/T 15658-2012Method for measurements of radio noise (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB/T 15658-1995 "city radio noise measurement method." To adapt to modern technology and electromagnetic measurements Changes in the environment, this standard is modified as follows.

--- Original standard name of "urban radio noise measurement method" to "radio noise measurement method." --- Chapter 1, the original standard heading "subject matter and scope" to "range", the content is changed to "This standard specifies the radio should General Methods of measurement for radio noise category and noise characteristics of different types and data processing methods. Also provides a measure The amount of equipment should meet performance targets. This standard applies to 9kHz ~ 18GHz band radio noise characteristics measuring. " --- Original standard in Chapter 2, the heading "reference standard" to "normative references" Change the contents "of this document for the following files Application is essential. For cited documents with dates, only the dated edition applies to this document. Undated Reference documents, the latest edition (including any amendments) applies to this document. "And adds four normative references.

--- Original standard in Chapter 3, the title "term" to "Terms and Definitions" adds white Gaussian noise is defined, the definition of impulse noise made modify.

--- Original standard Chapter 4, the title "Characterization of radio noise field strength parameters" to "measurement parameters." Original standard of 4.1, 4.2 change New standards in 4.1.1 and 4.1.2, the new parameters on the pulse noise measurement 4.2.

--- Original title standard 4.1 "equivalent antenna noise factor" is changed to "WGN measurement parameters." --- Original content changes to the standard 4.1 "This standard is the equivalent antenna noise figure to represent Gaussian white noise level." --- Original standard Chapter 5, "equivalent measure antenna noise factor" delete, change the "measuring device." Adds "APD measuring receiver machine".

--- Original standard Chapter 6, "the choice of site and data processing" delete, change the "measuring method", the contents of the rearranged and modified.

--- Original standard Chapter 7, "measurement time" delete, change to "data acquisition and data processing." Increase the data acquisition and data processing Specific content.

--- Delete the original standard Appendix A, Appendix B, Appendix C.

--- Increased 2 ITU-R references.

The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. The standard by the China Communications Standards Association.

1 Scope

This standard specifies the general classification of methods of measurement of radio noise in radio applications and different types of noise characteristics and a data processing law. Also provides the measuring equipment should meet performance targets.

This standard applies to 9kHz ~ 18GHz band measuring radio noise characteristics.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 4824-2004 industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

GB/T 6113.101-2008 radio disturbance and immunity measuring apparatus and methods - Part 1-1. Radio show Disturbance and immunity measuring apparatus - Measuring apparatus

GB/T 7349-2002 high-voltage overhead transmission line and substation radio interference measuring method

GB/T 15709-1995 AC electrified railway catenary measurement method of radiated radio interference

3 Terms and Definitions

The following terms and definitions apply to this document.