Valid

GB/T 14196.3-2023Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) (English PDF)

白炽灯安全规范第3部分：卤钨灯（非机动车辆用）

Preview PDF

This is a limited preview

Buy now to download the full PDF (23 pages)

Need quotation for your management?

Get a formal quotation for GB/T 14196.3-2023 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

December 28, 2023

Implementation date

January 1, 2026

Scope

GB/T 14196.3-2023 is the English-translated version of 白炽灯安全规范第3部分：卤钨灯（非机动车辆用）.

GB/T 14196.3-2023 is the Chinese standard "Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)".

Its scope clause reads: This document specifies the safety requirements for single-ended and double-ended tungsten halogen lamps with a rated voltage not exceeding 250V for the following purposes: ---Projection (including movie projection and still projection); ---Photography (including studio); ---Flood lighting; ---Special purpose lighting; ---General purpose lighting; ---Stage lighting: This document specifies the photobiological safety requirements in accordance with IEC 62471: Risk of failure of lamps as specified in this document as shown below Category Flag Risk Level: a) Flood lighting; b) General lighting shaded lamps; c) General lighting reflector lamps: This document does not apply to single-ended tungsten halogen lamps for general lighting used to replace traditional tungsten filament lamps as specified in GB/T 14196:2:. Its clauses include normative reference documents; terms and definitions.

Found what you need?

Document preview — GB/T 14196.3-2023

National Standard of the People's Republic of China

ICS: 29.140.20
Classification: K 71
Replacing: GB 14196.3-2008

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 requests
5 Rating
Appendix A (Normative) Symbol
Appendix B (Normative) Method for testing lamp air pressure
Appendix C (Normative) Induced Failure Test
Appendix D (Normative) Lamp design requirements
Appendix E (normative) Qualification conditions for type testing
Appendix F (informative) Measurement method of glass bulb wall temperature

1 Scope

This document specifies the safety requirements for single-ended and double-ended tungsten halogen lamps with a rated voltage not exceeding 250V for the following purposes:

---Projection (including movie projection and still projection);

---Photography (including studio);

---Flood lighting;

---Special purpose lighting;

---General purpose lighting;

---Stage lighting:

This document specifies the photobiological safety requirements in accordance with IEC 62471: Risk of failure of lamps as specified in this document as shown below

Category Flag Risk Level:

a) Flood lighting;

b) General lighting shaded lamps;

c) General lighting reflector lamps:

This document does not apply to single-ended tungsten halogen lamps for general lighting used to replace traditional tungsten filament lamps as specified in GB/T 14196:2:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations

For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 2900:65 Electrical terminology lighting (GB/T 2900:65-2023, IEC 60050-845:2020, IDT)

GB/T 14094-2016 Performance requirements for tungsten halogen lamps (for non-motor vehicles) (IEC 60357:2011, NEQ)

GB/T 14196:1-2023 Safety specifications for incandescent lamps Part 1: Tungsten filament lamps for general lighting in households and similar occasions (IEC 60432-1:2011, MOD)

GB/T 21098 Lamp caps, lamp holders and gauges for testing their safety and interchangeability Part 4: Guidelines and general information (GB/T 21098-2022,IEC 60061-4:2018,IDT)

IEC 60061-1 Lampcaps, lampholders and gauges for testing their safety and interchangeability Part 1: Lampcaps and

Note: GB/T 1406 (all parts) Type and size of lamp holder (IEC 60061-1)

IEC 60061-3 Lampcaps, lampholders and gauges for testing their safety and interchangeability Part 3: Gauges (Lampcapsand

Note: GB/T 1483 (all parts) Inspection gauge for lamp holders and lamp holders (IEC 60061-3)

3 Terms and definitions

The terms and definitions defined in GB/T 2900:65 and the following apply to this document:

GB/T 43081 | GB/T 43017 | GB/T 19258.1 | GB/T 14196.2 | GB/T 14196.1 | GB 14196.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 60061-1 · IEC 60061-3

Cited by

GB 43471-2023Light sources - Safety requirements

How to Download GB/T 14196.3-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.