Valid

GB/T 12601-2026Basic terminology of the harmonic gear drive (English PDF)

谐波齿轮传动基本术语

Preview PDF

Also coversGB/T12601-2026 + GBT12601-2026

This is a limited preview

Buy now to download the full PDF (35 pages)

Need quotation for your management?

Get a formal quotation for GB/T 12601-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 28, 2026

Implementation date

April 1, 2027

Scope

GB/T 12601-2026 is the English-translated version of 谐波齿轮传动基本术语.

Basic terminology of the harmonic gear drive is defined in this standard. Harmonic gear drives, also known as strain wave gearing, are used where compact size, high reduction ratio, and precise motion are needed, for example in robots, instruments, and automation equipment. A shared vocabulary helps engineers, buyers, and sellers describe components in the same way in drawings, contracts, and technical documents.

The document is useful to gear designers, reducer manufacturers, robotics and machinery companies, technical writers, and translators who must handle Chinese engineering terminology consistently. It is a recommended national standard (GB/T), so it is voluntary unless referenced elsewhere. This edition replaces GB/T 12601-1990 and was issued on 28 September 2026, with effect from 1 April 2027. It sits alongside the separate standard for harmonic drive reducers as part of the same technical area, though the two documents serve different purposes: one defines terms, the other addresses the products.

Found what you need?

Document preview — GB/T 12601-2026

National Standard of the People's Republic of China

ICS
29.160.99
Classification
K20
Replacing
GB/T 12601-1990

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

Foreword

GB/T 12601-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 28 September 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 April 2027.

This edition replaces GB/T 12601-1990.

It is under the responsibility of the Ministry of Industry and Information Technology (Electronics).

Classification: ICS 29.160.99; CCS K20.

1 Scope

Basic terminology of the harmonic gear drive is defined in this standard. Harmonic gear drives, also known as strain wave gearing, are used where compact size, high reduction ratio, and precise motion are needed, for example in robots, instruments, and automation equipment. A shared vocabulary helps engineers, buyers, and sellers describe components in the same way in drawings, contracts, and technical documents.

The document is useful to gear designers, reducer manufacturers, robotics and machinery companies, technical writers, and translators who must handle Chinese engineering terminology consistently. It is a recommended national standard (GB/T), so it is voluntary unless referenced elsewhere. This edition replaces GB/T 12601-1990 and was issued on 28 September 2026, with effect from 1 April 2027. It sits alongside the separate standard for harmonic drive reducers as part of the same technical area, though the two documents serve different purposes: one defines terms, the other addresses the products.

Remaining clauses in the full document

  • 2 Normative references
  • 3 Terms and definitions

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.

Editions of GB/T 12601

EditionTitleRevisionStatus
GB/T 12601-2026Basic terminology of the harmonic gear drivecurrent editionCurrent
GB/T 12601-1990Basic terminology of harmonic gear driveprevious editionIn force until 1 April 2027

This page sells the current edition, GB/T 12601-2026. Earlier editions are listed for reference only.

How to Download GB/T 12601-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
35 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 12601-2026

$545.00