GB/T 12554-2006Specifiication of injection moulds for plastics (English PDF)
塑料注射模技术条件
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GB/T 12554-2006 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 8, 2006
Implementation date
April 1, 2007
Scope
GB/T 12554-2006 is the English-translated version of 塑料注射模技术条件.
GB/T 12554-2006 is the Chinese national standard on specifiication of injection moulds for plastics, in the field of manufacturing engineering.
The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up — which in practice is how most foreign buyers meet it.
It was issued on 8 December 2006 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 April 2007.
Classification: ICS 25.120.30, CCS J46. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there.
The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Found what you need?
Document preview — GB/T 12554-2006
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J46
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Requirements for the parts
- 4 Requirements for the assembly
- 5 Acceptance
- 6 Marking, packaging, transport and storage
3 Requirements for the parts
4 Requirements for the assembly
5 Acceptance
6 Marking, packaging, transport and storage
Foreword
This document was issued on 8 December 2006 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China, and has been in force since 1 April 2007.
It replaces GB/T 12554-1990.
Classification: ICS 25.120.30, CCS J46.
About this edition
GB/T 12554-2006 is the current edition. It was issued on 8 December 2006 and has been in force since 1 April 2007, replacing GB/T 12554-1990.
GB/T 12554-1990 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.
Classification and status
GB/T 12554-2006 is classified under ICS 25.120.30, in the field of manufacturing engineering. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.
Its Chinese Standard Classification code is CCS J46. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.
The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 12554
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 12554-2006 | Specifiication of injection moulds for plastics | current edition | Current |
| GB/T 12554-1990 | Specification of injection mould for plastics | previous edition | Superseded |
This page sells the current edition, GB/T 12554-2006. Earlier editions are listed for reference only.
How to Download GB/T 12554-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 12554-2006
$105.00