Valid

GB/T 11577-2020Container securing fitting for ships (English PDF)

船用集装箱紧固件

Preview PDF

This is a limited preview

Buy now to download the full PDF (41 pages)

Need quotation for your management?

Get a formal quotation for GB/T 11577-2020 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

December 14, 2020

Implementation date

July 1, 2021

Scope

GB/T 11577-2020 is the English-translated version of 船用集装箱紧固件.

GB/T 11577-2020 is the Chinese standard "Container securing fitting for ships".

Its scope clause reads: This standard specifies the classification and marking, requirements, test methods, inspection rules, and standards of marine container fasteners (hereinafter referred to as fasteners) Display, packaging, storage and transportation: This standard applies to the design, manufacture and acceptance of fasteners:. Its clauses include categories.

Found what you need?

Document preview — GB/T 11577-2020

National Standard of the People's Republic of China

ICS: 47.020.40
Classification: U24

Issued by: State Administration for Market Regulation; Standardization Administration of China

Preface
1 Scope
2 Normative references
3 Category
4 Requirements
5 Test method
6 Inspection rules
7 Mark
8 Packaging, storage and transportation

1 Scope

This standard specifies the classification and marking, requirements, test methods, inspection rules, and standards of marine container fasteners (hereinafter referred to as fasteners)

Display, packaging, storage and transportation:

This standard applies to the design, manufacture and acceptance of fasteners:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 699-2015 High-quality carbon structural steel

GB/T 700-2006 Carbon structural steel

GB/T 709-2019 Size, shape, weight and allowable deviation of hot-rolled steel plate and steel strip

GB/T 712-2011 Structural steel for ships and marine engineering

GB/T 1591-2018 Low-alloy high-strength structural steel

GB/T 3077-2015 Alloy structural steel

GB/T 6414-2017 Casting dimensional tolerance, geometric tolerance and machining allowance

GB/T 8923:1-2011 Visual assessment of surface cleanliness of steel surface treatment before coating-Part 1: Uncoated

The corrosion level and treatment level of the steel surface and the steel surface after the original coating has been completely removed

GB/T 12362-2016 steel die forging tolerance and machining allowance

GB/T 13912-2002 Technical requirements and test methods for hot-dip galvanized coatings on steel parts with metal coverings

GB/T 13914-2013 Dimensional tolerance of stamping parts

ISO 3874:2017 Series 1 Freight Container Handling and Securing (Series1freightcontainers-Handlingand securing)

ISO 17905:2015 Ships and Ocean Technology Marine Container Securing Device Installation, Inspection and Maintenance (Shipsand marinetechnology-Instalation, inspectionandmaintenanceofcontainersecuringdevicesforships)

3 categories

3:1 Classification of fasteners

The classification of fasteners is shown in Table 1:

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 8923 · ISO 3874 · ISO 17905

Cited by

GB 16994.4-2023Safety requirements for port operation - Part 4: General cargo container

Similar standards

GB 11871-2009|GB 30979-2014|GB 41731-2022|GB 44018-2024|GB/T 10104-2011

Editions of GB/T 11577

Edition	Title	Revision	Status
GB/T 11577-2020	Container securing fitting for ships	current edition	Current
GB/T 11577-2010	Container securing fitting for ships	previous edition	Superseded

This page sells the current edition, GB/T 11577-2020. Earlier editions are listed for reference only.

How to Download GB/T 11577-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.