GB/T 11298.1-1997Methods of measurement for satellite television earth receive-only station--System measurement (English PDF)

3 Measurement conditions

4 Figure of merit (G/T)

5 Gain stability

6 Video signal-to-noise ratio

7 Static threshold value

8 Luminance/chrominance delay inequality

9 Luminance/chrominance gain inequality

10 Differential gain distortion

11 Differential phase distortion

12 Audio signal-to-noise ratio

13 Total harmonic distortion of the audio

Foreword

This document was issued on 26 August 1997 by the State Bureau of Technical Supervision, and has been in force since 1 May 1998.

It is the first edition of this standard.

Classification: ICS 33.060.30, CCS M75.

About this edition

GB/T 11298.1-1997 is the first edition of this standard. It was issued on 26 August 1997 and has been in force since 1 May 1998.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite GB/T 11298.1-1997 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Classification and status

GB/T 11298.1-1997 is classified under ICS 33.060.30, in the field of telecommunications. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS M75. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.