Valid

GB/T 10575-2007Anhydrous lithium chloride (English PDF)

无水氯化锂

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 10575-2007 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Level / Type

National · Recommended

Issue date

April 30, 2007

Implementation date

November 1, 2007

Scope

GB/T 10575-2007 is the English-translated version of 无水氯化锂.

GB/T 10575-2007 is the Chinese national product standard for anhydrous lithium chloride.

It fixes the three designations graded by chemical composition - LiCl-T, LiCl-0 and LiCl-1 - the composition table, the chemical analysis used to check it, the inspection and acceptance rules with batches of 1 000 kg ± 1 kg of a single designation and sampling of one, two or four packages, and the marking, packaging, transport, storage and order-form contents.

It covers anhydrous lithium chloride made by the conversion method from lithium carbonate, lithium hydroxide monohydrate or lithium-bearing brine, a product used in welding, in materials and air-conditioning equipment and in making lithium metal.

Among the standards it quotes are GB 191-2000 and GB/T 6388-1986. It replaces GB/T 10575-1989, was issued on 30 April 2007 and has applied since 1 November 2007.

Found what you need?

Document preview — GB/T 10575-2007

National Standard of the People's Republic of China

ICS
71.060.50
Classification
G12

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative References4
  • 3 Requirements4
  • 4 Test Methods5
  • 5 Inspection Rules5
  • 6 Marking, Packaging, Transportation and Storage6
  • 7 Order Form (or Contract) Contents7

Foreword

This Standard replaced GB/T 10575-1989 Lithium Chloride Anhydrous.

Compared with GB/T 10575-1989, the major changes of this Standard are as follows.

--- Delete the Class-2 product (LiCl-2) in the original standard; add a superfine product designation (LiCl-T);

--- Correspondingly change the requirements for the chemical compositions of Class-0 and Class-1 products; so that the quality levels of each designation products are improved compared with the requirements in the original standard.

1 Scope

This Standard specifies the classification, requirements, test methods, inspection rules and markings, packaging, transportation and storage, etc. of the anhydrous lithium chloride product.

This Standard is applicable to the anhydrous lithium chloride made by the conversion method with lithium carbonate, lithium hydroxide monohydrate or Li-contained brine as raw materials.

This Product is used for the welding, material and air-conditioning devices, as well as for making lithium metal, etc.

2 Normative References

The provisions in following documents become the provisions of this Standard through reference in this Standard. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies.

GB 191-2000 Packaging - Pictorial Marking for Handling of Goods

GB/T 6388-1986 Transport Package Shipping Mark

3 Requirements

3.1 Product classification

The product can be divided into three designations according to the chemical compositions, i.e., LiCl-T, LiCl-0, LiCl-1.

3.2 Chemical compositions

The chemical compositions of the product shall comply with the provisions of Table 1.

4 Test Methods

4.1 The analysis of chemical compositions of the product shall be carried out as per the provisions of GB/T 11064.

5 Inspection Rules

5.1 Inspection and acceptance

5.1.1 The product shall be inspected by the quality supervision department of the supplier, ensuring that the product to comply with the provisions of this Standard or order contract; and fill the quality certificate.

5.2 Batching

Products shall be submitted for acceptance in batches, each batch consists of the mixture of the same designation. The net weight of each batch shall be 1 000 kg ± 1 kg.

5.3 Sampling

5.3.1 Take any 1 piece for less than 10 pieces; take any 2 pieces for 10~20 pieces; and take any 4 pieces for more than 20 pieces.

5.4 Judgment of inspection results

5.4.1 When the chemical composition is unqualified, the batch of products shall be judged as unqualified.

6 Marking, Packaging, Transportation and Storage

6.1 Marking

The product pack shall be marked with the following information such as product name, batch number, molecular formula, net weight, gross weight, place of origin and the "fear of moisture" mark in Figure 6 of GB 191-2000, and the "chemical " mark in Figures 1~5 of GB/T 6388-1986.

6.2 Packaging, transportation and storage

6.3 Quality certificate

Each batch of products shall be attached with quality certificate, indicating.

7 Order Form (or Contract) Contents

The order form (or contract) for ordering the products listed in this Standard shall include the following contents. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 10575

EditionTitleRevisionStatus
GB/T 10575-2007Anhydrous lithium chloridecurrent editionCurrent
GB/T 10575-1989Lithium chioride anhydrousprevious editionSuperseded

This page sells the current edition, GB/T 10575-2007. Earlier editions are listed for reference only.

How to Download GB/T 10575-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 10575-2007

$210.00