GB 4706.101-2010Household and similar electrical appliances -- Safety -- Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (English PDF)
Also coversGB4706.101-2010
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB 4706.101-2010 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
January 14, 2011
Implementation date
September 15, 2011
Scope
GB 4706.101-2010 (Household and similar electrical appliances -- Safety -- Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment) is available as an English-translated PDF.
GB 4706.101-2010 — This clause of GB 4706.1-2005 is replaced by the following. This Part of GB 4706 deals with the safety of electric drives for rolling equipment such as shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
Drives for equipment with a spring-controlled driven part, such as a folding arm awning, are also within the scope of this Part. NOTE 101 Examples of rolling equipment that can be driven are - awnings; - blinds; - grilles covering doors and windows; - projection screens; - shutters covering doors and windows.
Examples are shown in Figure 101. NOTE 102 Drives may be supplied with a driven part. Appliances not intended for normal household use but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry, on farms and on industrial premises, are within the scope of this Part.
As far as is practicable, this Part deals with the common hazards presented by appliances that are encountered by all persons in and around the home.
However, in general, it does not take into account playing with the appliance by young children but recognizes that children may be in the vicinity. driven part shall not unroll in an uncontrolled manner.
After 15 s, the driven part is retracted. The drive is then supplied at 0.9 times rated voltage and started 10 times from different positions in the rolling direction so as to retract the driven part.
The drive is allowed to come to rest between successive starts. The drive shall retract the driven part to the fully rolled position each time and protective devices shall not operate.
Found what you need?
Document preview — GB 4706.101-2010
National Standard of the People's Republic of China
- ICS
- 97.120
- Classification
- Y 69
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword...4
- 1 Scope...5
- 2 Normative references...6
- 3 Terms and definitions...6
- 4 General requirement...8
- 5 General conditions for the tests...8
- 6 Classification...8
- 7 Marking and instructions...8
- 8 Protection against access to live parts...10
- 9 Starting of motor-operated appliances...11
- 10 Power input and current...11
- 11 Heating...11
- 12 Void...11
- 13 Leakage current and electric strength at operating temperature...11
- 14 Transient overvoltages...12
- 15 Moisture resistance...12
- 16 Leakage current and electric strength...12
- 17 Overload protection of transformers and associated circuits...12
- 18 Endurance...12
- 19 Abnormal operation...12
- 20 Stability and mechanical hazards...13
- 21 Mechanical strength...15
- 22 Construction...15
- 23 Internal wiring...16
- 24 Components...16
- 25 Supply connection and external flexible cords...16
- 26 Terminals for external conductors...16
- 27 Provision for earthing...16
- 28 Screws and connections...16
- 29 Clearances, creepage distances and solid insulation...16
- 30 Resistance to heat and fire...17
- 31 Resistance to rusting...17
- 32 Radiation, toxicity and similar hazards...17
- Annexes...20
- Annex C (Informative) Aging test on motors...20
- Bibliography...21
Foreword
All technical contents of this Part are mandatory.
GB 4706 Safety of household and similar electrical appliances consists of
several parts. Part 1 is general requirements; the rest are particular
requirements.
This Part is the 101st Part of GB 4706.
This Part shall be in use with GB 4706.1-2006 Safety of household and
similar electrical appliances; General requirements.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part uses translation method to identically adopt IEC 60335-2-97.2009
Household and similar electrical appliances - Safety - Part 2-97.Particular
requirements for drives for rolling shutters, awnings, blinds and similar
equipment, including its Supplement 1 (2004) and Supplement 2 (2008).
This Part made the following editorial modifications.
- modified "Part 1" to "GB 4706.1";
- used decimal point "." to replace "," that was used as decimal point.
Attention is drawn to the possibility that some of the elements of this Part may
be the subject of patent rights. The issuing authority shall not be held
responsible for identifying any or all such patent rights.
This Part was proposed by China Light Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee on
The drafting organizations of this Part. Shenzhen Inspection and Quarantine
Science Research Institute, Foshan Quality Supervision and Inspection
Center, Zhejiang Inspection and Quarantine Science and Technology
Research Institute, China Household Electrical Appliances Research Institute,
Zhejiang Quality and Technical Supervision and Testing Institute, Shanghai
Entry-Exit Inspection and Quarantine Bureau Electromechanical Product
Testing Technology Center, Ningbo Product Quality Supervision and
Inspection Research Institute.
Main drafters of this Part. Xie Jinxiong, Ou Zhuoma, Wang Chun, Wu MEng,
Wang Xiaoling, Jiang Yingzhou, Chen Shan, Suo Yanyan, Zhang Dong.
Household and similar electrical appliances - Safety -
Particular requirements for drives for rolling shutters,
awnings, blinds and similar equipment
1 Scope
This clause of GB 4706.1-2005 is replaced by the following.
This Part of GB 4706 deals with the safety of electric drives for rolling
equipment such as shutters, blinds and awnings, intended for household and
similar purposes, their rated voltage being not more than 250 V for
single-phase appliances and 480 V for other appliances.
Drives for equipment with a spring-controlled driven part, such as a folding
arm awning, are also within the scope of this Part.
NOTE 101 Examples of rolling equipment that can be driven are
- awnings;
- blinds;
- grilles covering doors and windows;
- projection screens;
- shutters covering doors and windows.
Examples are shown in Figure 101.
NOTE 102 Drives may be supplied with a driven part.
Appliances not intended for normal household use but that nevertheless may
be a source of danger to the public, such as appliances intended to be used
by laymen in shops, in light industry, on farms and on industrial premises, are
within the scope of this Part.
As far as is practicable, this Part deals with the common hazards presented
by appliances that are encountered by all persons in and around the home.
However, in general, it does not take into account playing with the appliance
by young children but recognizes that children may be in the vicinity.
driven part shall not unroll in an uncontrolled manner.
After 15 s, the driven part is retracted.
The drive is then supplied at 0.9 times rated voltage and started 10 times from
different positions in the rolling direction so as to retract the driven part. The
drive is allowed to come to rest between successive starts.
The drive shall retract the driven part to the fully rolled position each time and
protective devices shall not operate.
20.103 The actuation of a control to stop the unrolling movement shall be
effective. Compliance is checked by the following test.
The drive is supplied at rated voltage and operated under normal operation in
the unrolling direction and the control is then actuated.
The driven part shall not move more than 100 mm before stopping.
NOTE The release of a biased-off switch is deemed to be actuation.
20.104 Drives supplied with a driven part shall operate so that injury is
prevented during the unrolling movement.
This requirement is deemed to be met if the appliance is controlled by a fixed
biased-off switch only or if the driven part, when fully unrolled, is at a height of
at least 1.8 m.
For roller shutters fitted to a roof or ceiling window, compliance is checked by
inspection, by measurement or by the tests of 20.104.1, or 20.104.2 or
20.104.3 For other appliances, compliance is checked by inspection, by
measurement or by the tests of 20.104.1 or 20.104.2.
20.104.1 The appliance is supplied at rated voltage and operated under
normal operation in the unrolling direction. An obstacle is placed 400 mm
above the fully unrolled position.
The force exerted by the bottom edge of the driven part is measured.
The test is repeated with the obstacle placed 100 mm above the fully unrolled
position.
The force shall not exceed
- 25 N, for more than 5 s;
- 150 N, for more than 0.5 s.
NOTE Impact forces are not measured.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
How to Download GB 4706.101-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4706.100-2009 — Household and similar electrical appliances - Safety - Particular requirements for multifunctional shower room
GB 4706.104-2010 — Household and similar electrical appliances -- Safety -- Particular requirements for heated gullies for roof drainage
GB 4706.105-2011 — Household and similar electrical appliances -- Safety -- Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioner systems
Secure payment via Stripe
Payments accepted
GB 4706.101-2010
$125.00