Valid

GB 37481-2019General technical specifications for vault doors (English PDF)

金库门通用技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB 37481-2019 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Mandatory

Issue date

April 4, 2019

Implementation date

May 1, 2020

Scope

GB 37481-2019 is the English-translated version of 金库门通用技术要求.

GB 37481-2019 is the Chinese standard "General technical specifications for vault doors". Its scope clause reads: This standard specifies the terms and definitions of treasury, product classification and marking, technical requirements, test methods, inspection rules and signs, packaging, Transportation and storage.

This standard applies to the manufacture, installation, inspection and acceptance of treasury products in the financial, security, industrial and commercial and related industries.

The doors used in his cultural relics and important items storage places can be referred to. This standard does not apply to the issuance of the People's Bank of China. Its clauses include terms and definitions.

Found what you need?

Document preview — GB 37481-2019

National Standard of the People's Republic of China

ICS: 13.310
Classification: L 91

Issued by: State Administration for Market Regulation; Standardization Administration of China

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 Product Classification and Marking
4.1 Product Classification
4.2 Product Classification
4.3 Product Mark
5 Technical requirements
5.1 General requirements
5.2 Structural requirements
5.3 Anti-theft lock requirements
5.4 Relocking device
5.5 day gate
5.6 Anti-destructive performance
5.7 Waterproof sealing function
5.8 Treasury Gate Middle Door
6 Test method
6.1 General requirements test
6.2 Structural requirements test
6.3 Anti-theft lock inspection
6.4 Re-locking device inspection
6.5 day gate test
6.6 Anti-destructive performance test
6.7 Waterproof Sealing Function Test
6.8 Treasury door middle door inspection
7 Inspection rules
7.1 Inspection classification
7.2 Test items and unqualified classification
7.3 Sampling and group approval rules
7.4 Decision Rule
8 Marking, packaging, transport and storage
8.1 Mark
8.2 Transportation and storage

1 Scope

This standard specifies the terms and definitions of treasury, product classification and marking, technical requirements, test methods, inspection rules and signs, packaging,

Transportation and storage.

This standard applies to the manufacture, installation, inspection and acceptance of treasury products in the financial, security, industrial and commercial and related industries.

The doors used in his cultural relics and important items storage places can be referred to.

This standard does not apply to the issuance of the People's Bank of China.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2828.1-2012.Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches plan

GB 16796-2009 Safety and alarm equipment safety requirements and test methods

GA/T 73-2015 mechanical anti-theft lock

GA374-2001 electronic anti-theft lock

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Vault door

A special door with certain vandalism installed at the entrance and exit of the vault.

3.2 Single fan swing treasury door

It consists of a swinging door leaf and a fixed door frame, and the opening and closing of the treasury door is fixed by the hinge or the door shaft on the side of the door.

3.3 Double fan open vault door

It is composed of two swinging door fans and a fixed door frame which are overlapped with each other, and the opening and closing of the treasury door is fixed by the hinge or the door shaft of the two door sides.

3.4 Pan Vault door slidingvaultdoor

It consists of a sliding door leaf and a fixed door frame, and the door leaf moves in parallel in the track to open and close the treasury door.

3.5 Vault door in the vaultdoorwithemergencydoor

There is a vault door on the door leaf with an emergency access door.

3.6 Door bolt mechanism boltwork

A component that keeps the vault door locked or open.

SJ/T 11794 | SJ/T 11795 | GB/T 41203 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB 10409-2019|GB/T 17565|GB 15210-2018|GB 12899-2018|GA/T 73|GB 16796

How to Download GB 37481-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.