Valid

GB 26920.2-2015Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances - Part 2: Commercial refrigerated cabinets with self-contained condensing unit (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB 26920.2-2015 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China

Level / Type

National · Mandatory

Issue date

December 10, 2015

Implementation date

January 1, 2017

Scope

GB 26920.2-2015 (Minimum allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances - Part 2: Commercial refrigerated cabinets with self-contained condensing unit) is available as an English-translated PDF.

GB 26920.2-2015 — This Part of the GB 26920 specifies the minimum allowable values of energy efficiency, energy efficiency grades, evaluation values of energy conservation, test methods, inspection rules, and energy efficiency grade labeling of commercial refrigerated cabinets with self-contained condensing unit (hereinafter referred to as "self-contained commercial refrigerated cabinets").

This Part applies to the following commercial refrigerated cabinets. — Self-contained commercial refrigerated cabinets for food sales and exhibitions; — Closed self-contained beverage refrigerated display cabinets used in stores, hotels and restaurants; — Commercial refrigerated cabinets with solid doors (such as kitchen refrigerators, refrigerated storage cabinets, and refrigerated working tables), and self-contained commercial refrigerated cabinets for non-retail uses.

Found what you need?

Document preview — GB 26920.2-2015

National Standard of the People's Republic of China

ICS
27.010
Classification
F 01

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China

Contents

  • Foreword...3
  • 1 Scope...5
  • 2 Normative references...5
  • 3 Terms and definitions...6
  • 4 Technical requirements...7
  • 5 Test methods...14
  • 6 Inspection rules...16
  • 7 Energy efficiency grade labeling...17
  • Appendix A...18

Foreword

The Section 4.2 of this Part is mandatory, while other sections are

recommended.

GB 26920 Minimum allowable values of energy efficiency and energy efficiency

grades for commercial refrigerating appliances is intended to develop the

following four parts.

— Part 1.Refrigerated display cabinets with remote condensing unit;

— Part 2.Commercial refrigerated cabinets with self-contained condensing

unit;

— Part 3.Refrigerating vending machine;

— Part 4.Commercial ice maker.

This Part is the Part 2 of GB 26920.

This Part is drafted according to the rules given in the GB/T 1.1-2009.

This Part was proposed by the Department of Resource Conservation and

Environmental Protection of National Development and Reform Commission,

and the Department of Energy Conservation and Comprehensive Utilization of

the Ministry of Industry and Information Technology.

This Part shall be under the jurisdiction of the National Technical Committee for

Standardization of Energy Foundation and Management (SAC/TC 20).

Drafting organizations of this Part. China National Institute of Standardization,

Chinese Association of Refrigeration, Internal Trade Engineering Design &

Research Institute, Qingdao Haier Special Freezer Co., Ltd, Hisense Ronshen

(Guangdong) Freezer Co., Ltd, Guangdong Xingxing Refrigeration Equipment

Co., Ltd, Yindu Kitchen Equipment Co. Ltd, AHT Cooling Systems (Changshu)

Co., Ltd, Panasonic Appliances Cold Chain (Dalian) Co., Ltd, Jiangsu Baixue

Electric Appliances Co., Ltd, Carrier Air-conditioning & Refrigeration R & D

Management (Shanghai) Co., Ltd, Qingdao Hiron Commercial Cold Chain Co.,

Ltd, Shandong Xiaoya Retail Equipment Co., Ltd, Qingdao Haier-Carrier

Refrigeration Equipment Co., Ltd, Shanghai Highly Nakano Refrigerators Co.,

Ltd, Hoshizaki Motor (Suzhou) Co., Ltd, Aucma Co., Ltd, Shandong Hongtai

Electrical Appliance Co., Ltd, Epta (Qingdao) Commercial Facilities Co., Ltd,

Beijing Er Shang-Fukushima Machinery Electric Co., Ltd, Wenling Beibingyang

Fresh Showcase Factory, Shanghai Furong Industry Co., Ltd, Zhongshan Jingli

Refrigeration Equipment Manufacturing Co., Ltd, Beijing Embraco Snowflake

Compressor Company Ltd, Secop Compressors (Tianjin) Co., Ltd, Zhengzhou

Kaixue Cold Chain Co., Ltd, Jimei University, Tianjin University of Commerce,

Shanghai Ocean University, Harbin University of Commerce, and National

Quality Supervision and Inspection Center of Commercial Refrigeration

Equipment.

Main drafters of this Part. Cheng Jianhong, Liu Xiaopeng, Yang Yifan, Xiao

Yang, Ma Jian, Cheng Kai, Ding Jianbo, Jiang Xiaolin, Chen Yongjun, Zhu Xi,

Yang Ping, Zhou Xiaobo, He Jiacai, Ma Hongkui, Hu Zhaolong, Su Gongbing,

Xu Ye, Li Wenhao, Cheng Guiliang, Guan Qiusheng, Zhan Xiaodong, Ye

Haiping, Pan Xuan, Sun Zhonghao, Lu Weishun, Hu Xiuzhen, Ren Kailong, Ji

Zhijian, Liu Ming, Qin Zongmin, Zhang Jianyi, Shen Jiang, Wan Jinkang, Liu

Zhaoyong, Lin Xiaomiao, Zhang Yanjie, Yin Gang, and Yan Huili.

Minimum allowable values of energy efficiency and

energy efficiency grades for commercial refrigerating

appliances – Part 2.Commercial refrigerated cabinets

with self-contained condensing unit

1 Scope

This Part of the GB 26920 specifies the minimum allowable values of energy

efficiency, energy efficiency grades, evaluation values of energy conservation,

test methods, inspection rules, and energy efficiency grade labeling of

commercial refrigerated cabinets with self-contained condensing unit

(hereinafter referred to as "self-contained commercial refrigerated cabinets").

This Part applies to the following commercial refrigerated cabinets.

— Self-contained commercial refrigerated cabinets for food sales and

exhibitions;

— Closed self-contained beverage refrigerated display cabinets used in

stores, hotels and restaurants;

— Commercial refrigerated cabinets with solid doors (such as kitchen

refrigerators, refrigerated storage cabinets, and refrigerated working

tables), and self-contained commercial refrigerated cabinets for non-retail

uses.

2 Normative references

The following documents are essential to the application of this document. For

dated references, only the versions with the dates indicated are applicable to

this document. For undated references, only the latest versions (including all

the amendments) are applicable to this document.

GB/T 21001.1 Refrigerated display cabinets – Part 1.Vocabulary

GB/T 21001.2-2015 Refrigerated display cabinets – Part 2.Classification,

requirements and test conditions

GB/T 21001.3 Refrigerated display cabinets – Part 3.Test rating

SB/T 10794.1-2012 Commercial refrigerated cabinets – Part 1.Vocabulary

3 Terms and definitions

The terms and definitions defined in the GB/T 21001.1, GB/T 21001.2-2015,

GB/T 21001.3, SB/T 10794.1-2012, SB/T 10794.2-2012, and SB/T 10794.3-

2012 as well as the following ones apply to this document.

3.1 Maximum allowable values of energy consumption of self-contained

commercial refrigerated cabinets

3.2 The base value of energy consumption

Ebase

It refers to the energy consumption of the commercial refrigerated cabinet with

single room and classified as some basic cabinet structure after 24-hour

operation under specified working conditions, in unit of kilowatt-hour per 24

hours (kWh/24h).

3.3 Actual energy efficiency index

It refers to the ratio OF the measured value of energy consumption (total energy

consumption, TEC) TO the maximum allowable value of energy consumption

(TECmax) of the self-contained commercial refrigerated cabinet.

3.5 The independent room

It refers to the refrigeration room using thermal insulation materials for isolation

in the refrigerated cabinet.

4 Technical requirements

4.1 Calculation of maximum allowable values of energy consumption

CALCULATE the maximum allowable values of energy consumption according

to the Formula (1).

4.2 Maximum allowable values of energy consumption of self-contained

commercial refrigerated cabinets

The energy consumption of different types of self-contained commercial

refrigerated cabinets shall not be greater than the maximum allowable value of

energy consumption of the corresponding type of products.

5 Test methods

5.1 General

Besides the requirements specified in the Sections 5.2, 5.3 and 5.4 of this Part

and the test methods for self-contained commercial refrigerated cabinets,

CONDUCT tests to the self-contained commercial refrigerated cabinets for

sales and exhibitions according to the provisions specified in the GB/T 21001.2-

2015; CONDUCT tests to the refrigerated cabinets with solid doors and the self-

contained commercial refrigerated cabinets for non-retail uses according to the

provisions specified in the SB/T 10794.2-2012; CONDUCT tests to the

beverage refrigerated display cabinets according to the provisions specified in

the SB/T 10794.3-2012.

5.2 Self-contained refrigerated display cabinets

CONDUCT the energy consumption test under the conditions of meeting the

test conditions and climate types specified in the GB/T 21001.1 and GB/T

21001.2-2015.USE lighting devices and anti-condensation heaters during the

test, unless this kind of devices are controlled by clocks, smart sensors, or

similar automatic defrosting devices. When the display cabinets are equipped

with night covers/night curtains and lighting devices, CONDUCT the test

according to the requirements for the display cabinets with night covers/night

curtains and lighting devices specified in the Step 2 of the Section 5.3.2.7 of the

GB/T 21001.2-2015.

5.4 Commercial refrigerated cabinets with solid doors

CONDUCT the energy consumption test according to the test conditions and

the conditions of the climate type 4 specified in the SB/T 10794.2-2012.Besides

using the interpolation method to conduct the energy consumption test, it is also

allowed to conduct the test that meets the (more severe) conditions of test

packet temperature, and whose characteristic temperature error is less than or

equal to 0.5°C.

6 Inspection rules

6.1 Exit-factory inspection

6.1.1 The maximum allowable values of energy consumption shall be

considered as the exit-factory inspection item of commercial refrigerated

cabinets.

6.1.2 The non-conforming products identified after the inspection are not

allowed to leave the factory.

6.2 Type inspection

6.2.1 The commercial refrigerated cabinets shall be conducted with the type

inspection under one of the following circumstances.

6.2.2 TAKE one sample each time for the sampling of type inspection. If the

energy consumption fails to conform to the requirements for the maximum

allowable values of energy consumption specified in this Part, DOUBLE the

number of samples taken from this batch of products for re-inspection. If there

is still one sample fails to conform to the requirements, this batch of products

will be identified as non-conforming products.

6.3 Inspection report

SEE Appendix A for the information needed for the exit-factory inspection and

type inspection reports.

6.4 Acceptance

The ordering party shall have the right to check whether the energy

consumption and energy efficiency grades of the products conform to the

requirements specified in this Part.

7 Energy efficiency grade labeling

7.1 The manufacturers shall test the energy consumption coefficient of their

products according to the requirements specified in this Part.

7.2 The manufacturers shall determine the rated energy efficiency grades of

the products according to the test results.

Appendix A

(Informative)

Inspection report information

A.1 General

This Appendix lists the information that shall be included in the inspection report

after accomplishing the inspection according to the GB/T 21001.2-2015 and

GB/T 21001.3 or SB/T 10794.1-2012, SB/T 10794.2-2012 and SB/T 10794.3-

2012 The test conducted to each sample shall have separate inspection result.

A.3 Information of self-contained commercial refrigerated cabinets

Trademark.

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

How to Download GB 26920.2-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB 26920.2-2015

$105.00