GA/T 1740.2-2024Security requirements for tourist attraction - Part 2: Lake type (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document is part 2 of GA/T 1740 "Safety precautions for tourist attractions". GA/T 1740 has been published in the following parts.

--- Part 1: Mountain type;

--- Part 2: Lake type.

This document was submitted by the Public Security Bureau of the Ministry of Public Security.

This document is under the jurisdiction of the National Security Alarm System Standardization Technical Committee (SAC/TC100).

Introduction

Safety precautions in tourist attractions are the basis for maintaining public security and order in tourist attractions, and can effectively prevent and stop crimes and emergencies.

The formulation and implementation of relevant standards for safety precautions in tourist attractions will help improve the social security prevention and control capabilities and levels of tourist attractions, and provide a the Ministry of Culture and Tourism has been responsible for the entire process of proposing, compiling and reviewing this document.

The Ministry of Tourism also participated in the review and guidance of the document, and selected leaders and experts from the Ministry of Tourism Market Management and Tourism Quality Supervision and Management Office.

Participating in relevant work at the same time ensures the scientificity and applicability of this document. This document will provide a basis for the safety prevention work of tourist attractions.

The relevant departments shall supervise and inspect the management units to fulfill their responsibilities and provide a basis.

GA/T 1740 "Safety Precautions for Tourist Attractions" is divided into two parts according to the classification of tourist attractions. The first part is mountain type and the second part is Some are of lake type.

--- Part 1: Mountainous type. The purpose is to standardize the basic requirements, key areas and regions, and prevention measures for mountainous tourist attractions.

Standard requirements, system technical requirements, and requirements for construction, inspection, acceptance, operation and maintenance.

--- Part 2: Lake type. The purpose is to standardize the basic requirements, key areas and regions, and prevention measures for lake-type tourist attractions.

Standard requirements, system technical requirements, and requirements for construction, inspection, acceptance, operation and maintenance.

Safety precautions for tourist attractions Part 2: Lake type

1 Scope

This document specifies the basic requirements for safety precautions in lake-type tourist attractions, key areas and regions, precaution requirements, system technical requirements, and and construction, inspection, acceptance, operation and maintenance requirements.

This document is applicable to the construction and management of security systems for AAAA-level and above lake-type tourist attractions, and other tourist attractions involving lakes.

The same shall apply to tourist attractions.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.

GB 12899 General technical specification for handheld metal detectors GB 15208.1 Microdose X-ray security inspection equipment Part 1: General technical requirements GB 15210 General technical specification for walk-through metal detection doors GB/T 16766 Basic Terminology of Tourism GB 17565-2022 General technical requirements for anti-theft security doors GB/T 28181 Technical requirements for information transmission, exchange and control of public security video surveillance network systems GB/T 33170 (all parts) Safety requirements for large-scale events GB 35114 Technical requirements for information security of public security video surveillance networks GB 50348-2018 Security Engineering Technical Standard GB 55029 General Specification for Security Engineering GA/T 761 Technical requirements for parking garage (lot) safety management system GA/T 841 General technical requirements for trace drug/explosive detectors based on ion mobility spectrometry

3 Terms and definitions

The terms and definitions defined in GB 50348-2018, GB 55029, GB/T 16766 and the following apply to this document.

security protection

Comprehensively use human defense, physical defense, electronic defense and other means to prevent, delay and stop intrusion, theft, robbery, destruction, explosion, Violent attacks and other incidents occur.

[Source. GB 50348-2018, 2.0.1, modified] 3.2 Security system security system A prevention system that uses physical protection, electronic protection and other technologies for the purpose of safety.

[Source. GB 50348-2018, 2.0.5]