Valid

GA/T 1739-2020Access control system - Controller (English PDF)

出入口控制系统控制器

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GA/T 1739-2020 in 30 minutes.

Issued by

Ministry of Public Security

Level / Type

National · Recommended

Issue date

September 9, 2020

Implementation date

February 1, 2021

Scope

GA/T 1739-2020 is the English-translated version of 出入口控制系统控制器.

GA/T 1739-2020 — This standard specifies the equipment composition, classification and identification, function and performance, power supply, electrical safety, and environmental fitness of entrance and exit controllers.

Compliance, electromagnetic compatibility, test methods, inspection rules, document provision, as well as marking, packaging, transportation and storage. This standard applies to the design, manufacture and inspection of entrance and exit controllers.

Found what you need?

Document preview — GA/T 1739-2020

National Standard of the People's Republic of China

ICS: 13.310
Classification: A 91

Issued by: Ministry of Public Security

Foreword
1 Scope
2 Normative references
3 Terms and definitions, abbreviations and symbols
3.1 Terms and definitions
3.2 Abbreviations
3.3 Symbol
4 Equipment composition
5 Classification and marking
5.1 Security Level
5.2 Installation category
5.3 Environmental category
5.4 Identification
6 Function and performance
6.1 Access control point
6.2 Instructions/Notice
6.3 Identification
6.4 Coercion
6.5 Priority control
6.6 Communication
6.7 Self-protection
7 Power supply
8 Electrical safety
8.1 Insulation resistance
8.2 Electric strength
8.3 Leakage current
8.4 Temperature rise
8.5 Flame retardant
8.6 Overcurrent protection
8.7 Overvoltage operation
8.8 Marking resistance
9 Environmental adaptability
9.1 High temperature (working state)
9.2 Low temperature (working state)
9.3 Constant heat and humidity
9.4 Temperature change (working state)
9.5 Sinusoidal vibration
9.6 Shock
9.7 Salt spray cycle durability
9.8 Enclosure protection class
10 Electromagnetic compatibility
10.1 Immunity to power supply voltage dips and short-term interruptions
10.2 Electrostatic discharge immunity
10.3 Radio-frequency electromagnetic field radiation immunity
10.4 Immunity to conducted disturbances induced by radio frequency fields
10.5 Immunity to electrical fast transient pulse groups
10.6 Surge (impact) immunity
10.7 Radio disturbance limit
11 Test method
11.1 General conditions
11.2 Simplified function test
11.3 Inspection of access control points
11.4 Instruction/notification requires inspection
11.5 Identification requirements inspection
11.6 Duress function test
11.7 Priority control function inspection
11.8 Communication function test
11.9 Self-protection function test
11.10 Power supply requirement test
11.11 Electrical safety test
11.12 Environmental adaptability test
11.13 Electromagnetic compatibility test
12 Inspection rules
12.1 Inspection classification
12.2 Inspection items and sequence
12.3 Batching rules and sampling rules
12.4 Judgment Rules
13 Document Provision
13.1 File content
13.2 Information provided with ACU
13.3 File format
13.4 Identification file
14 Marking, packaging, transportation and storage
14.1 Marking
14.2 Packaging
14.3 Transportation
14.4 Storage
Appendix A (Normative Appendix) Timing Diagram

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the equipment composition, classification and identification, function and performance, power supply, electrical safety, and environmental fitness of entrance and exit controllers.

Compliance, electromagnetic compatibility, test methods, inspection rules, document provision, as well as marking, packaging, transportation and storage.

This standard applies to the design, manufacture and inspection of entrance and exit controllers.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 2423.3-2016 Environmental Test Part 2: Test Method Test Cab. Constant Humidity Test GB/T 2828.1 Sampling inspection procedure by attributes Part 1: Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 2829 Periodic Inspection Sampling Procedures and Tables by Attributes (Applicable to the Inspection of Process Stability) GB/T 4208-2017 Enclosure protection grade (IP code) GB/T 9254-2008 Information Technology Equipment Radio Disturbance Limits and Measurement Methods GB/T 15211-2013 Environmental adaptability requirements and test methods for security alarm equipment GB/T 15408 Security System Power Supply Technical Requirements GB 16796-2009 Safety requirements and test methods for security alarm equipment GB/T.20138-2006 The degree of protection of electrical equipment enclosures against external mechanical collisions (IK code) GB/T 30148-2013 EMC immunity requirements and test methods for safety protection alarm equipment GB/T 37078 Technical requirements for entrance and exit control system

3 Terms and definitions, abbreviations and symbols

3.1 Terms and definitions

The following terms and definitions defined in GB/T 37078 apply to this document.

3.1.1

Multiple occupancy

Ensure that at any time, the number of staying targets is not less than the minimum number of staying targets (two or more) set in the designated controlled area System functions.

Note. Also called multi-occupancy.

3.1.2

Resident target inventory rolcal List the system functions of the vouchers and/or target information staying in the controlled area.

Note. Also called roll call.

3.1.3

Self-protection

Measures used to prevent, detect and/or report, intentionally and unintentionally damage and/or interfere with the normal operation of the equipment.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 9254-2008

How to Download GA/T 1739-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.