GA/T 1730-2020Marks of conformity assessment for public security products (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009:

This standard was proposed by the Science and Technology Information Bureau of the Ministry of Public Security:

This standard is under the jurisdiction of the National Standardization Technical Committee for Security and Alarm System (SAC/TC100):

Drafting organizations of this standard: China Security Technology Protection Certification Center, National Security Protection Alarm System Product Quality Supervision and Inspection Center (North Beijing), the First Research Institute of the Ministry of Public Security:

1 Scope

This standard specifies the technical requirements, performance requirements, test methods, inspection rules, packaging, labeling, Transportation and storage:

This standard applies to the design of the mark used in product conformity assessment activities approved by the public safety conformity assessment management department of the Ministry of Public Security:

Design, production and inspection:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 2792-2014 Test method for peel strength of adhesive tape GB/T 2828.1-2012 Sampling inspection procedure by attributes Part 1: Batch inspection sampling searched by acceptance quality limit (AQL) plan GB/T 7705-2008 Lithographic decoration printed matter GB/T 7706-2008 Letterpress decoration printed matter GB/T 17001.1-2011 Anti-counterfeiting ink Part 1: UV excited fluorescent anti-counterfeiting ink GB/T 19425-2003 General technical requirements for anti-counterfeiting technology products GB/T 22258-2008 General technical requirements for anti-counterfeiting labels GA 244-2000 Technical Standards for People's Police Badges

3 Terms and definitions

The following terms and definitions apply to this document:

Markofconformityassessmentforpublicsecurityproduct A mark confirming that the product meets the conformity assessment requirements of public safety products:

Sizestandardizedmark the conformity assessment mark of public safety products that meets the specified size produced by the mark issuing agency:

Non-standardmark

The public safety product conformity assessment mark produced by the licensed user in proportion to the size of the standard specification mark:

Additional informationextrainformation Information that requires special instructions on the conformity assessment mark of public safety products:

Markcode

A group of characters that is uniquely corresponding to the logo and is easy to recognize and process given by the logo issuing authority or the licensed user: