CJ/T 322-2010Ozone generator for water and waste water treatment (English PDF)
水处理用臭氧发生器
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 322-2010 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 14, 2010
Implementation date
June 1, 2010
Scope
CJ/T 322-2010 is the English-translated version of 水处理用臭氧发生器.
CJ/T 322-2010 — This standard specifies the classification and specifications of ozone generators for water treatment, structure and materials, requirements, test methods, inspection rules, signs, packages Loading, transportation and storage.
This standard applies to drinking water, reclaimed water, sewage treatment ozone generator. Chemical oxidation, paper bleaching and food industry consumption Ozone disinfection and other applications can refer to the implementation of ozone generator.
Found what you need?
Document preview — CJ/T 322-2010
National Standard of the People's Republic of China
- ICS
- 91.190
- Classification
- Q 81
- Replacing
- CJ/T 3028.1-1994; CJ/T 3028.2-1994
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions, Symbols, Abbreviations
- 4 Categories and specifications
- 5 Structure and materials
- 6 Requirements
- 7 Test method
- Inspection rules
- 9 Logo, packaging, transportation and storage
- Appendix A (Normative) Determination of ozone concentration
- Appendix B (informative) gas volume flow rate correction calculation
- Appendix C (Informative) Ozone generator performance parameters test report Table
- References
Foreword
This standard is CJ/T 3028.1-1994 "ozone generator" and CJ/T 3028.2-1994 "ozone generator ozone concentration, production Measurement of Electricity Consumption and Electricity Consumption ", the main changes compared with CJ/T 3028.1-1994 and CJ/T 3028.2-1994 are as follows.
--- CJ/T 3028.1-1994 and CJ/T 3028.2-1994 two parts of the merger;
--- Change and increase the terms and definitions of some of the contents of the gas standard conditions changed conditions;
--- Added product classification and specifications;
--- The original "technical requirements and test methods" are divided into requirements, test methods, inspection rules;
--- Remove the original production process parts and components requirements, refined the overall product requirements;
--- Removed the product level division content;
--- Added safety class requirements;
--- Changed the concentration of ozone, production, electricity consumption measurement and calculation methods; Determination of ozone concentration increased UV absorption method;
--- Change Appendix A, B, an increase of Appendix C.
This standard Appendix A normative appendix, Appendix B, Appendix C is an informative annex.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban Water Supply and Drainage Products Standardization Technical Committee.
1 Scope
This standard specifies the classification and specifications of ozone generators for water treatment, structure and materials, requirements, test methods, inspection rules, signs, packages Loading, transportation and storage.
This standard applies to drinking water, reclaimed water, sewage treatment ozone generator. Chemical oxidation, paper bleaching and food industry consumption Ozone disinfection and other applications can refer to the implementation of ozone generator.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.
GB 150 steel pressure vessel GB/T 191 Packaging - Pictorial signs Ambient air quality standard GB 3095-1996 GB 4208 enclosure protection (IP code) Laboratory use specifications and test methods for analysis GB/T 6682-2008 GB 7521.1-2005 Low-voltage switchgear and control equipment - Part 1. Type test and partial type test sets equipment GB/T 13306 signs GB 13384 Mechanical and electrical product packaging General technical requirements GB 14050 system grounding type and safety technical requirements Ambient air - Determination of ozone - UV spectrophotometry GB 19517 National Electrical Equipment Safety Technical Specification
3 Terms and definitions, symbols, abbreviations
The following terms and definitions, symbols, abbreviations apply to this standard.
3.1 Terms and definitions
3.1.1
In the electrode and the discharge space blocked by the dielectric body, the phenomenon of gas discharge caused by the application of AC voltage is increased.
3.1.2
The ozone-producing basic unit consists of the dielectric and the electrode and discharge space separated by it.
3.1.3
A unit consisting of one or more ozone generating units.
3.1.4
Oxygen or air through the dielectric barrier discharge means necessary to produce ozone.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 3095-1996Ambient air quality standards
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 13306Plates
- GB 14050Types and safety technical requirements of system earthing
- GB 19517National technical specification for the safety of electric equipments
GB 150 · GB 4208 · GB 7521.1-2005 · GB 13384
How to Download CJ/T 322-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14050-2008 — Types and safety technical requirements of system earthing
GB 15037-2006 — Wines
GB 15040-1994 — Working standard lamps for the measurement of luminous flux
Secure payment via Stripe
Payments accepted
CJ/T 322-2010
$355.00