CJ/T 222-2006Quality assessment procedures and test rules for gas-burning appliances for domestic use (English PDF)

Foreword

All terms of this standard are recommended.

The type test and product qualification supervision content of this standard refer to the relevant contents of the EU 90/396/EEC "Combustion Apparatus Directive".

Appendix A of this standard is a normative appendix, Appendix B, Appendix C, Appendix D, Appendix E, and Appendix F are informative appendices.

This standard was proposed by the Institute of Standards and Ratings of the Ministry of Construction.

This standard is under the jurisdiction of the China Municipal Engineering North China Design and Research Institute, which is managed by the Ministry of Construction's urban gas standard technology.

This standard was drafted. Jiangsu Provincial Product Quality Supervision and Inspection Center, Zhongshan Huadi Gas Appliance Co., Ltd., Hunan Schindler Group Company, Shaanxi Province City Gas Appliance Quality Supervision and Inspection Center, Foshan Mei's Kitchen Appliance Manufacturing Co., Ltd., Jiangsu Ray Water Heater Co., Ltd., Guangdong Wanjiale Gas Appliance Co., Ltd.

1 Scope

This standard specifies the first party inspection, second party inspection, and third party of domestic gas burning appliances and related components using urban gas.

Inspection procedures, sampling plans, inspection items and conformity assessment procedures for inspections.

This standard applies to the conformity assessment procedures and inspections of urban gas burning appliances and related components.

2 Normative references

The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.

GB/T 2828.1. Sampling and sampling procedures - Part 1 . Batch-to-batch sampling plan searched by the acceptance quality limit (AQL) GB/T 2828.3 skip batch count sampling test procedure GB/T 2829 Cycle Inspection Counting Sampling Procedure and Sampling Table (Applicable to Inspection of Process Stability) GB/T 13264 Small batch count sampling inspection program and sampling table for non-conforming product rate GB 17905 Household Gas Burning Appliance Safety Management Rules GB/T 19001 quality management system requirements

3 Terms and definitions

See Appendix A for terms and definitions.

4 First party inspection and conformity assessment