YY/T 1303-2015Nucleic acid amplification reverse dot blot reagent(kit) (English PDF)
核酸扩增反向点杂交试剂(盒)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 1303-2015 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
March 2, 2015
Implementation date
January 1, 2016
Scope
YY/T 1303-2015 is the English-translated version of 核酸扩增反向点杂交试剂(盒).
YY/T 1303-2015 is the Chinese pharmaceutical industry standard for the nucleic acid amplification reagent kit read by reverse dot blot, in which the amplified product is hybridised to probes fixed on a membrane.
It specifies the terms and definitions, the requirements, the test methods, the marking, the labelling, the instructions for use and the rules for packaging, transport and storage, covering the detection limit, the specificity, the agreement with reference materials, the repeatability, the internal control and the stability. Issued on 2 March 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — YY/T 1303-2015
National Standard of the People's Republic of China
- ICS
- 11.100
- Classification
- C 44
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements and test methods
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the reverse dot blot nucleic acid amplification reagent (box) [hereinafter referred to as reagent (box)] terms and definitions, requirements and test methods Marking, labeling and instructions for use, packaging, transportation and storage requirements.
This standard applies to in vitro diagnostic reagents for nucleic acid amplification reverse dot blot (box).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs Symbols - Part 1 YY/T 0466.1 medical equipment used with medical device labels, labeling and information. General requirements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Reverse dot blot
reversedotblot; RDB By a tagged nucleic acid sample with previously immobilized on a solid support specific probe hybridization, the nucleic acid sample is detected No Technical containing the desired gene fragment.
4 Requirements and test methods
4.1 Appearance
The kit should specify appearance requirements. In natural light, visual inspection, the appearance should at least meet the following conditions.
a) reagent (box) component is complete;
b) packaging clean appearance, no leaks, no damage;
c) signs, labels legible.
4.2 The detection limit
The kit should be prescribed limit of detection, detection limits and clear determination requirements. Setting the detection limit of the reference product should follow the following principles.
a) shall prescribe and provide reagent (box) detection limit of the design range can detect all targets of gene fragments;
b) where applicable, the use of national reference for verification;
c) the target gene fragment kit can detect more categories (n>=3), select at least two as reference material to verify the detection limit;
d) the detection limit of the selected reference material should be representative.
4.3 Reference product meets the positive rate
Detection national reference and/or reference materials business, the positive reference material, each sample was measured 1, the test results were positive, in line with […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download YY/T 1303-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
YY/T 1303-2015
$115.00